revs racing
-
- Got muddy boots
- Posts: 7
- Joined: Mon Oct 21, 2013 10:37 pm
- Location: cheddar somerset
revs racing
Hi guys just swapped engines on my sj knackered g13B to an ok g13A everything runs as it should,
except when i switch headlights on revs race upto 3000 rpm. any ideas? cheers mike
except when i switch headlights on revs race upto 3000 rpm. any ideas? cheers mike
- Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: revs racing
Welcome to the club
Needs adjusting.....................or just unplug the bugger.
Needs adjusting.....................or just unplug the bugger.
- Attachments
-
- Idle up SJ 413.jpg (256.4 KiB) Viewed 7738 times
-
- 100_4865.jpg (229.47 KiB) Viewed 7738 times
2005-GV 1600se, "Hell" What do I know!
-
- Got muddy boots
- Posts: 7
- Joined: Mon Oct 21, 2013 10:37 pm
- Location: cheddar somerset
Re: revs racing
cheers guys "removed the bugger" spot on everthing works. MOT tommrow fingers crissed sorry
dyslexia stops me posting as much as i like, ages rihgting post again thankyou
dyslexia stops me posting as much as i like, ages rihgting post again thankyou
-
- Got muddy boots
- Posts: 7
- Joined: Mon Oct 21, 2013 10:37 pm
- Location: cheddar somerset
Re: revs racing
MOT failed offside front axle swivel joint has excessive play, can this be adjusted or will it need replacing?
- Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: revs racing
I'd think it's either knackered kingpin bearings or it needs some shims removing.
Probably the bearings need changing though.
Probably the bearings need changing though.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
- donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
-
- Got muddy boots
- Posts: 7
- Joined: Mon Oct 21, 2013 10:37 pm
- Location: cheddar somerset
Re: revs racing
any idea where i can buy a new bearing?
Re: revs racing
Hi OldSkool .... If you want me to get you them from my local parts man send me a PM and ill try and sort you out
Maruti Gypsy MG410
Electric Fan upgrade
5 speed box
30" Insa Turbo Saharas
1.5" Shackle Lift
LWB Pickup Conversion
Lots of stickers and a Skull gearknob.
Daymaker led lights
Electric Fan upgrade
5 speed box
30" Insa Turbo Saharas
1.5" Shackle Lift
LWB Pickup Conversion
Lots of stickers and a Skull gearknob.
Daymaker led lights
Re: revs racing
Kingpin bearings can be bought on eBay or most bearing suppliers, if you search on here in the axles sub forum Scott has a sticky on axles, and it lists all the bearings/dimensions etc. Just remember there's two fitted one top & one bottom on EACH side so four kingpin bearings for the front axle.
Just had a look in garage, they are 30302 J2, if you google it you will find them all over.
Just had a look in garage, they are 30302 J2, if you google it you will find them all over.