Santana Fusebox

[HuwJones]

Hi guys.
I've had loads of electrical problems with my '89 Santana over the lest few weeks. Everything from headlights occasionally working and the ignition just stopping whilst driving. I found the problem was the fuse box. A passenger has at some point put their foot against it, and it has cracked the PCB bit of the board. But, instead of replacing it with a equally venerable Santana fuse box, I was wondering if anyone has ever replaced one with a aftermarket fuse holder? And has anyone got a diagram on what fuse does what? I've figured some out but not all of them.
Thanks
Huw

[twiss]

It would be easier to just replace it rather than re-wire the thing, my Sammy has the fusebox under the drivers side dash, but could you just move it more upwards and out of the way of people feet?

[Darrell]

Going by this santana diagram http://forum.suzukiclubuk.co.uk/vi ... =11&t=2097 we have this

[twiss]

Ooh I see what you mean now by crappy fuse box!

[donkeychomp]

Pretty sure I have a fusebox kicking about in the garage somewhere.

[HuwJones]

Going by this santana diagram http://forum.suzukiclubuk.co.uk/vi ... =11&t=2097 we have this

Thanks, That is very helpful! It's also very interesting, my fuse box/panel/board thing, has the same 'burn' marks on the white connector. When I bought it, the 15Amp (blue) fuse above it was melted (I mean literally melted, not fused). It's all a bit shit really! I thought it was because the previous owner had done something funny with the wiring, but it could be a 'Normal' Santana loom problem.

Donkeychomp, if you've got one, what would you want for it?

Thanks

Huw

[Darrell]

These are the pictures I have in my archive, including the one with the wire colours shown. I gave up finishing it as I don't know the rest of the wire colours.
Any chance of a pic or 2 of yours , or have you chopped the connectors off.
Cheers - Darrell.