How have we all wired our in?
Obviously it needs an earth and a switched life, preferably from the ignition. Just wondered who had wired it where.
Facet fuel pump wiring
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Facet fuel pump wiring
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Facet fuel pump wiring
You've got the wiring sorted with what you say.
For location of the pump. Pumps push better than suck, so ideally near to the tank.
Having said that I put one on the bulkhead in my sons Vitara and it was never a problem.
So wherever suits seems to work.
For location of the pump. Pumps push better than suck, so ideally near to the tank.
Having said that I put one on the bulkhead in my sons Vitara and it was never a problem.
So wherever suits seems to work.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
- kibris
- Engaged 4wd low
- Posts: 108
- Joined: Wed Jul 18, 2012 9:06 am
- Location: Alsancak, Girne, Cyprus
Re: Facet fuel pump wiring
I rewired all my Sammy and wired the facet pump from an ignition live from the fusebox - oh and i moved mine from mthe back to under the bonnet - works fine and is accesable if/when it goes wrong!! read "be prepared" thread :(Jordi wrote:How have we all wired our in?
Obviously it needs an earth and a switched life, preferably from the ignition. Just wondered who had wired it where.
- twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Facet fuel pump wiring
I bolted my fuel pump to the inside of the wing, then used the attaching bolt for an earth.
Then I wired in a relay to activate the pump, taking the relay activation signal from the positive terminal on the ignition coil... now the pump starts with the key
Then I wired in a relay to activate the pump, taking the relay activation signal from the positive terminal on the ignition coil... now the pump starts with the key
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."