1.3 on 33's" you def need to lower the gearing. 410 t box is a start, would be better with a rocklobster (super low geared t box), or change the diffs for diff ratio's.
As Jordi said there's not much you can do with the 1.3 power gain wise
Need a bit more.
Re: Need a bit more.
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: Need a bit more.
There's loads you can do to the 1.3 if you want to spend money and ship it over from the US. There's probably more available for the 1.3 than the 1.6. Cams, hi-compression 10.5:1 pistons etc.
Stick quad gsxr carbs on a stock 1.3 and you can get more power and torque than a 1.6.
Stick quad gsxr carbs on a stock 1.3 and you can get more power and torque than a 1.6.
Re: Need a bit more.
Now that sounds very interesting Scottiej do yo have any more info on that conversion.