Mikes Samurai build / use / fixing broken bits after abuse

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1829
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: Mikes Samurai build updated 17/05/13 :)

Post by mike harris » Sun Dec 22, 2013 10:19 pm

Well today didn't go very well !!

Bent spring, fuel pump died, smashed windscreen.

45 minutes at Slindon.....
Attachments
image.jpg
image.jpg (742.33 KiB) Viewed 5123 times
image.jpg
image.jpg (1.1 MiB) Viewed 5123 times
image.jpg
image.jpg (931.3 KiB) Viewed 5123 times
image.jpg
image.jpg (796.32 KiB) Viewed 5123 times
image.jpg
image.jpg (1.12 MiB) Viewed 5123 times
image.jpg
image.jpg (756.31 KiB) Viewed 5123 times

User avatar
Rhinoman
Suzuki Guru
Suzuki Guru
Posts: 1034
Joined: Tue Mar 26, 2013 5:42 pm
Location: Brinkworth
Contact:

Re: Mikes Samurai build updated 17/05/13 :)

Post by Rhinoman » Sun Dec 22, 2013 10:27 pm

That spring is a bit bent, did you hit something hard with the shackle?
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz

User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:

Re: Mikes Samurai build updated 17/05/13 :)

Post by Ladaman » Sun Dec 22, 2013 10:28 pm

Bummer.

On the first pic, it looks like the shock might be toast too.

:thumbdown:
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage

User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1829
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: Mikes Samurai build updated 17/05/13 :)

Post by mike harris » Sun Dec 22, 2013 10:34 pm

Nope was done whilst winching hard, Vertical over the top of a bank. They've lasted a long time these springs, I've run them all the time my trucks been built and Paul had them on his before that !!

So they've done really well.

Time for a new set :)

Shocks fine, it's on a pin at the top so it can move a lot. I was worried the axle bent, but I think the spring took the whole thing.

There's the Christmas drive round next weekend il try and have it fixed for that.

User avatar
suzukisteve
Suzuki Guru
Suzuki Guru
Posts: 1344
Joined: Sat Feb 04, 2012 10:07 am
Location: Christchurch, Dorset

Re: Mikes Samurai build updated 17/05/13 :)

Post by suzukisteve » Mon Dec 23, 2013 9:49 am

dude you must drive to the max to keep smashin stuff up like that lol, im impressed!
pickle power!

User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1829
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: Mikes Samurai build updated 17/05/13 :)

Post by mike harris » Mon Dec 23, 2013 10:32 am

It was a mental climb, near vertical winching. Madness. It was going over the top which pushed down hard on the front, forcing the axle back. Missing links opened so the spring was forced backwards, resulting in this.

Managed to break a spoke on my steering wheel as well !!

What an expensive morning.

Springs are on order from devon, they couldn't say how long they would be. I am going to get all the bits together, fit them and repair the front end which I smashed also. Going to respray the chassis and under the wheel arches ect. Need to do this as I have it pressure washed up after every event, and it's taking its toll on it. Front bumper is going to be mucked about with as well, want to make it stronger than it is.

But it's clean now, I have a long list to be getting on with il keep you all updated :)

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Mikes Samurai build updated 17/05/13 :)

Post by Jordi » Mon Dec 23, 2013 10:41 am

Back to the workshop. Hope it was a good 45minutes.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1829
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: Mikes Samurai build updated 17/05/13 :)

Post by mike harris » Mon Dec 23, 2013 4:10 pm

Very good 45 minutes :)

Like you said back into the shop she goes !!

User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1829
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: Mikes Samurai build updated 17/05/13 :)

Post by mike harris » Wed Dec 25, 2013 10:58 pm

Right, springs will take 8 weeks to get here, my new hubs have gone from Utah, to east midlands (yes in the uk) back to Salt Lake City..... Wtf?! God knows, anyway there's a massive gathering this weekend at brothers common for the New Years drive round. I am going to warm the spring and straighten it in the morning, fuel pump seems fine now, think there's a wiring issue there. Screens staying in it for now, even though it's badly smashed, steering wheels being chemical metaled back together. I don't care as long as it turns.

Got a very large shopping list for the new year, need to earn some money !!

Fort hose of you who don't know I am going to run in mud monsters challenge series next year, should be a bit of fun, potentially may kill my suzuki though...... But those of you who know me I am not competitive, at all lol.

Il put some pics up of the spring in the morning, I managed to get the links to go the right way so now just need to bend it the right way. Oxy propane coming out :)

User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1829
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: Mikes Samurai build updated 17/05/13 :)

Post by mike harris » Thu Dec 26, 2013 3:44 pm

What the fuck is going on?!
Attachments
image.jpg
image.jpg (213.81 KiB) Viewed 5047 times

Post Reply