Mikes Samurai build / use / fixing broken bits after abuse
Re: Mikes Samurai build updated 17/05/13 :)
Mike, have you sourced bearings for the diff? I know Scott was after some for a diff rebuild, and I could obtain them considerably cheaper than anywhere else through a company at work if you want to let me know the bearing numbers.
Otherwise it's sounding good just lacking pictures!
Otherwise it's sounding good just lacking pictures!
- mike harris
- SCUK is my life
- Posts: 1828
- Joined: Sat Jan 08, 2011 8:30 pm
- Location: hascombe Surrey
Re: Mikes Samurai build updated 17/05/13 :)
It doesn't need bearings as the carrier just needs to come out.
Good to know though, sure il need some in the future.
Mike
Good to know though, sure il need some in the future.
Mike
- mike harris
- SCUK is my life
- Posts: 1828
- Joined: Sat Jan 08, 2011 8:30 pm
- Location: hascombe Surrey
Re: Mikes Samurai build updated 17/05/13 :)
Progress !!
- Attachments
-
- image.jpg (661.87 KiB) Viewed 5406 times
-
- image.jpg (716.73 KiB) Viewed 5406 times
-
- image.jpg (794.34 KiB) Viewed 5406 times
-
- image.jpg (697.33 KiB) Viewed 5406 times
-
- image.jpg (742.22 KiB) Viewed 5406 times
- mike harris
- SCUK is my life
- Posts: 1828
- Joined: Sat Jan 08, 2011 8:30 pm
- Location: hascombe Surrey
Re: Mikes Samurai build updated 17/05/13 :)
I am pleased with this, still may well take the rear back out and do more trussing !!
Honesty if this bends I am going portal.
Mike
Honesty if this bends I am going portal.
Mike
- Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: Mikes Samurai build updated 17/05/13 :)
That looks monstrous! It's got a Mad Max quality about it.
The looks like it's hampering the shorter truss a lot though.
The looks like it's hampering the shorter truss a lot though.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: Mikes Samurai build updated 17/05/13 :)
Looks good
umm that looks inposible to bend tbh
umm that looks inposible to bend tbh
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
- mike harris
- SCUK is my life
- Posts: 1828
- Joined: Sat Jan 08, 2011 8:30 pm
- Location: hascombe Surrey
Re: Mikes Samurai build updated 17/05/13 :)
That will be fine !! Truss me !! Haha
Thing is the other sides solid, and there made of thick steel, the only way it will bend is if the welds break. Diff housing breaks up maybe or the knuckles them selves break.
Thing is the other sides solid, and there made of thick steel, the only way it will bend is if the welds break. Diff housing breaks up maybe or the knuckles them selves break.
-
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Mikes Samurai build updated 17/05/13 :)
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
- suzukisteve
- Suzuki Guru
- Posts: 1344
- Joined: Sat Feb 04, 2012 10:07 am
- Location: Christchurch, Dorset
Re: Mikes Samurai build updated 17/05/13 :)
mike if you bend this, A: I want a video of the crazy shit you were doing at the time, and B: you should receive medal for it!
pickle power!
- mike harris
- SCUK is my life
- Posts: 1828
- Joined: Sat Jan 08, 2011 8:30 pm
- Location: hascombe Surrey
Re: Mikes Samurai build updated 17/05/13 :)
Haha !! Yeh lets hope not
With a bit of luck il get a diff today and then I can build it with the new shafts and ain't it
With a bit of luck il get a diff today and then I can build it with the new shafts and ain't it