Rear view mirror

All tech relating to the Suzuki Vitara that won't relate to any other models, Front IFS etc.
Post Reply
JonathanT
Got muddy boots
Got muddy boots
Posts: 4
Joined: Wed Aug 21, 2013 4:22 pm

Rear view mirror

Post by JonathanT » Wed Aug 21, 2013 4:37 pm

Hi,
I removed the rear view mirror whilst I was trying to find out why the sunroof wasn't working, and now I can't work out how the damned thing stays attached to the roof, It has two massive holes, presumably for the bolts, but whilst I have screws that screw into the threaded holes in the roof none of them will keep the mirror in place as their heads aren't big enough, am I missing a pair of washers or something?
Damned Haynes manual is no use whatsoever (typical)
someone please answer, cos she needs an MOT!
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Rear view mirror

Post by dan_2k_uk » Wed Aug 21, 2013 5:10 pm

I have no idea about the mirror fitting. What I do know is that you dont need it for an MOT.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: Rear view mirror

Post by turbo-tom » Wed Aug 21, 2013 5:17 pm

Go to your local fixing place and get some washers. Failing that im sure Darell will have a diagram for it.
Tom :)

Ford Fiesta ST :D
Top
JonathanT
Got muddy boots
Got muddy boots
Posts: 4
Joined: Wed Aug 21, 2013 4:22 pm

Re: Rear view mirror

Post by JonathanT » Wed Aug 21, 2013 5:59 pm

thanks for replies!

Thought interior mirror was an MOT fail?
Problem is it would need 2 much longer bolts. will go have a dig in my box of bolts........
strange that the bolts would have a small thread (5mm?) whilst the mirror mounting holes are nearer 13mm..
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Rear view mirror

Post by ScottieJ » Wed Aug 21, 2013 7:33 pm

If its anything like the SJ they have these small plastic cone things that the screws sit in.
Zuki Build

Steady as she goes!
Top
User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:
Contact Darrell

Re: Rear view mirror

Post by Darrell » Wed Aug 21, 2013 11:06 pm

Well it shows a plastic cover............
Attachments
Untitled.png
Untitled.png (100.13 KiB) Viewed 6451 times
2005-GV 1600se, "Hell" What do I know!
Top
User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Rear view mirror

Post by donkeychomp » Wed Aug 21, 2013 11:56 pm

If you are desperate you could buy a universal one with a suction cap, think every motor factor will have them.
If it ticks over...leave it
Top
vitara_mad
Engaged 4wd low
Engaged 4wd low
Posts: 135
Joined: Thu Sep 15, 2011 10:05 pm
Location: dronfield , derbyshire

Re: Rear view mirror

Post by vitara_mad » Thu Aug 22, 2013 9:02 pm

there is 2 plastic bungs that go in the holes then screws go through them
Top
JonathanT
Got muddy boots
Got muddy boots
Posts: 4
Joined: Wed Aug 21, 2013 4:22 pm

Re: Rear view mirror

Post by JonathanT » Sun Sep 08, 2013 3:30 pm

thanks for the replies, I can't find the bungs (must have put them somewhere "safe" so as to not lose them). but have managed to use a pair of longer bolts and large washers for now.
Top
Post Reply

Return to “Vitara Specific Tech”