Waterproofing

Got an electrical gremlin? Ask the question here.
Post Reply
User avatar
d86
Engaged 4wd low
Engaged 4wd low
Posts: 228
Joined: Mon Oct 12, 2009 10:06 pm
Location: bath

Re: Waterproofing

Post by d86 » Fri Oct 23, 2009 4:11 pm

did you know you can get 2 gallons (10 ish liters) of water in a condom.


tony :shock: :roll:
Top
dan
Got muddy boots
Got muddy boots
Posts: 82
Joined: Sat Jun 06, 2009 3:55 pm
Location: lyndhurst, hampshire

Re: Waterproofing

Post by dan » Fri Oct 23, 2009 8:05 pm

but a condom can be used for other things... what else are you going to do with marigolds? the washing up??!
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Waterproofing

Post by dan_2k_uk » Fri Oct 23, 2009 8:16 pm

do people actually get problems with water. ive fully submerged my engine on quite a few occasions and never had a problem. spluttered a couple of times but not even enough to really affect performance
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Waterproofing

Post by ScottieJ » Fri Oct 23, 2009 8:45 pm

Its one of those things with petrol engines, some of them are better than others, i only ever gloved the coil on mine to protect it from any spray and it was usually fine as the dizzy's are pretty high up and out the way and as long as the seal is good they dont let much water in. having good HTleads helps too old ones dont like water :lol: thats what happened below :lol:

Image

Image
Zuki Build

Steady as she goes!
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Waterproofing

Post by ROBBIE » Fri Oct 23, 2009 10:52 pm

Scott wot are u wearing in there :?:
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Waterproofing

Post by ScottieJ » Fri Oct 23, 2009 10:56 pm

it was a fancy dress offroading weekend fundraising for macmillan cancer nurses so my mate and i were dressed as clowns :lol: quite appropriate me thinks :lol:
Zuki Build

Steady as she goes!
Top
User avatar
w1ldstar
Got muddy boots
Got muddy boots
Posts: 95
Joined: Fri Oct 02, 2009 7:58 pm
Location: Upper Wick, Nr Worcester

Re: Waterproofing

Post by w1ldstar » Mon Oct 26, 2009 7:41 am

thanks for that,

Rubber glove it is then 8-)

Nice pics scott, look like you was having fun there
Suzuki Vitara - 1.5" Suspension lift, Bits4Vits Recovery Bar, Roof rails, Steel front diff.
Drives Shafts broke to date: N/S = 1 - O/S = 0
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Waterproofing

Post by ScottieJ » Mon Oct 26, 2009 12:40 pm

I was there :roll: but then i had to get it home!!!! managed to find someone with some spare HT leads and then had to drive 60miles+ home with the clutch seized on thanks to that hole! :lol:
Zuki Build

Steady as she goes!
Top
Post Reply

Return to “Electrical”