Request for replacement carb/fuel injector . (Mikumi model)

[mikephilo]

Hi, I would be grateful for any advice/help any members can give me.

My 1998 Suzuki Samurai/ SJ 413 has emission issues and needs a replacement/refurbished fuel injector. It’s a Spanish (Santana Motors) build and Suzuki dealers in Spain, UK & Germany only seem to have carb details and no record of the fuel Mikumi injector fitted and quote a part number for a carb

Details are as follows. (Mikumi model) Mono injector carb as fitted to G13BA engine. This was fitted to various models of Suzuki, 1989 Sidekick, 1989–1997 Swift, 1985 onwards Samurai/SJ413. The VIN # of my Samurai is VSESJS00C00208630.

Other than repair, can anyone suggest a replacement, bearing in mind it has to conform to emission levels with a catalytic convertor fitted.
Does anyone know if ADK is still trading as no emails/calls answered for past few weeks.

[Anton]

Are the injectors the same as the ones on the 8v Vitara SPI models? I'm just wondering if you could scavenge the parts you need from a Vitara - SPI 1.3's are rare where SPI 1.6's are fairly commonplace. Another option is perhaps getting a whole Vitara 8v or 16v engine and ECU and upgrading to a Vit engine - as I'm certain the parts for those are easy to get.

Plus you'll have a more driveable vehicle.

Your other option might be to convert to carb, my (non cat) carb'd 1.3 has rediculously low emissions:



I don't know if that's low enough for your vehicle to pass, but I imagine it is... I think from 1986 until about 2002, you had to get below 3.5% CO, and I'm under 1%, so even if mine was a 1986+ (it's a 1985 so I only have to aim for 4.5) I'd still be fine.

Don't quote me on that, especially if you're not in the UK...

[twiss]

Ive sent my parts guy here in malta a message to see if he has them. There is a rental company in Gozo that has a few of the injection models so he normally keeps parts in stock for them

[Darrell]

Blooming expensive
This is the only injector I can find for the Samurai, hope there all the same .

[twiss]

my guy here can't get them :(

[mikephilo]

Blooming expeellrrnsive
This is the only injector I can find for the Samurai, hope there all the same .

Darrell, looks familiar, and similar to mine!!
Could you send me a link to the source please, and you say its pricy, whats the cost and the supplier please. Very grateful, you are the closest so far after worldwide enquiries so

Mike

[mikephilo]

my guy here can't get them :(

Thanks Twiss

[mikephilo]

Are the injectors the same as the ones on the 8v Vitara SPI models? I'm just wondering if you could scavenge the parts you need from a Vitara - SPI 1.3's are rare where SPI 1.6's are fairly commonplace. Another option is perhaps getting a whole Vitara 8v or 16v engine and ECU and upgrading to a Vit engine - as I'm certain the parts for those are easy to get.

Plus you'll have a more driveable vehicle.

Your other option might be to convert to carb, my (non cat) carb'd 1.3 has rediculously low emissions:



I don't know if that's low enough for your vehicle to pass, but I imagine it is... I think from 1986 until about 2002, you had to get below 3.5% CO, and I'm under 1%, so even if mine was a 1986+ (it's a 1985 so I only have to aim for 4.5) I'd still be fine.

Don't quote me on that, especially if you're not in the UK...

[Darrell]

I just "Googled" the part number, this is one of the suppliers http://www.rockauto.com/en/catalog/suzu ... tor%2C6224

It shows one brand as "Standard motor products TJ63", when I "Googled" that lots of suppliers showed up.

[daemon982]

Hi

I have the whole injector unit from suzuki samurai G13BA, do you only need the injector?