Project KJA

[Anton]

Gocha. So you'd have to rewire them so that the front sidelights come on with the indicators not the sidelights if you went full amber.

And then you'd need sidelights in your headlights or something.

I have actually read that bit of the MOT manual before, for some reason the bit about only having red lights on the rear is the only bit that stuck with me.

[ianedwards]

Sorry should have said, there is side lights in the headlights, I updated them. Oops,

So it doesn't matter if I use the originals or just plane Amber, or led

I'm kinda leaning towards the original ones, not sure why tho..

Just means running a few more wires to get the side lights working again.

[ianedwards]

as promised a ups guy dropped this off today

IMG_3050 (1).jpg (81.95 KiB) Viewed 7857 times

couldn't resist to have gander

IMG_3051.jpg (127.57 KiB) Viewed 7857 times

now it gets difficult, as i have no power or welder :( its going to take a lot of measuring and drawings, making bits up my dads and then bringing it back to check, I'm a sod for building things and working it out as i go along.

IMG_3052.jpg (114.22 KiB) Viewed 7857 times

it is a nice winch tho, think it will look good

[ianedwards]

bit more done,

IMG_3053.jpg (81.34 KiB) Viewed 7835 times

IMG_3054.jpg (91.78 KiB) Viewed 7835 times

IMG_3064.jpg (60.71 KiB) Viewed 7835 times

IMG_3065.jpg (70.8 KiB) Viewed 7835 times

[donkeychomp]

Very nice work..keep it up!

[Anton]

Love the colour!

[ianedwards]

hopefully ill get it fitted tonight and get the other one started,

getting the old decals off is a nightmare, heat gun required, need to find it

ford tractor blue

[ianedwards]

update,

managed to track down some nuts to fit the wiper spindles, what a pain that was!
they where to long and had to cut them down but they are fine.

IMG_3068.jpg (66.88 KiB) Viewed 7801 times

wipers fitted and working great, even had a bit of a test. also fitted the washer jet as i lost it, had to take the gauges and vents out to get at it, my fault

IMG_3069.jpg (104.34 KiB) Viewed 7801 times

door on, looks good i hope, just got to change the bolts on the door for stainless ones, to match the ones in the wing, but it started raining :(

IMG_3066.jpg (110.52 KiB) Viewed 7801 times

not too bad,

IMG_3067.jpg (107.69 KiB) Viewed 7801 times

just waiting for some new clips to come for the door cards, a few seem to be missing.

but coming along nicely, quite chuffed

[donkeychomp]

Can you get a close up pic of the switches you have mounted underneath the air vent. That does look interesting.

[ianedwards]

yea sure, will do after work.