steering on a sammy

Post your questions about your suspension and steering problems here!
Post Reply
zukzuk
Got muddy boots
Got muddy boots
Posts: 26
Joined: Tue Dec 09, 2008 8:16 pm

steering on a sammy

Post by zukzuk » Sun May 03, 2009 8:33 pm

hi .. ive got a knock coming up through the steering column every time i go over a bump ..... if i go slow then move the wheel left to right it has the knock .. so would it be a worn uj ?? if so has any one got one column or uj or know where to get one???

carnut
Can I have a tow
Can I have a tow
Posts: 361
Joined: Sat Feb 07, 2009 5:45 pm

Re: steering on a sammy

Post by carnut » Sun May 03, 2009 8:57 pm

ZUKZUK,, ive got the complete steering asembly of a sj, comprises of,
coloum, steering box, pitman(drop arm),, drag link,, link arm,,.
let me know what you need,,
andy

zukzuk
Got muddy boots
Got muddy boots
Posts: 26
Joined: Tue Dec 09, 2008 8:16 pm

Re: steering on a sammy

Post by zukzuk » Mon May 04, 2009 10:51 am

the only part i need i think is the column as when i move the column it moves at the spline piece ive tried to tighten the nut but it wont move...
Attachments
tn_Photo010.jpg
tn_Photo010.jpg (112.7 KiB) Viewed 6013 times

carnut
Can I have a tow
Can I have a tow
Posts: 361
Joined: Sat Feb 07, 2009 5:45 pm

Re: steering on a sammy

Post by carnut » Mon May 04, 2009 11:35 am

were abouts are you!!

zukzuk
Got muddy boots
Got muddy boots
Posts: 26
Joined: Tue Dec 09, 2008 8:16 pm

Re: steering on a sammy

Post by zukzuk » Mon May 04, 2009 11:40 am

im in bournemouth

User avatar
urbanzook
Winching along now
Winching along now
Posts: 526
Joined: Tue Jul 08, 2008 8:04 pm
Location: stevenage
Contact:

Re: steering on a sammy

Post by urbanzook » Mon May 04, 2009 8:39 pm

the nut your doing up is a locating nut there is a small groove in the spline where the nut/bolt goes to keep it together
its not a tight/loose bolt, the play/knocking you are having is most probably the steering box there is a nut and a flat head screw loosen the nut do the screw up an then tighten the nut again should solve your problem oh its on top can't miss it
DONT FOLLOW ME YOU WONT MAKE IT !!!
SEE WOT I GET UP TO CLICK ME!!!!

Post Reply