hif38 into a 410

Engine not running right? see if we can help you!
Post Reply
kim&luke
Got muddy boots
Got muddy boots
Posts: 14
Joined: Sat May 29, 2010 6:31 pm

hif38 into a 410

Post by kim&luke » Mon Sep 20, 2010 5:08 pm

Hi Guys ive got a su hif 38 off ebay and have fitted it to the engine it fires up and seems to run ok but it has 2 more tubes coming out of it one im sure is just another beather but the other seems to be a return ?? do i plumb this in to to fuel return pipe to the tank or not ?? i have added a pic its from a mini form and has been labled not sur if its right or not ?? help ......
Attachments
25_SUHIF38_1.jpg
25_SUHIF38_1.jpg (18.13 KiB) Viewed 4866 times
Top
kim&luke
Got muddy boots
Got muddy boots
Posts: 14
Joined: Sat May 29, 2010 6:31 pm

Re: hif38 into a 410

Post by kim&luke » Mon Sep 27, 2010 5:07 pm

any help would be great guys....
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: hif38 into a 410

Post by ROBBIE » Mon Sep 27, 2010 6:58 pm

hello on my old 1.3 it had a pipe that just hung down, never seemed to lose fuel.
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
User avatar
Henry
Suzuki Guru
Suzuki Guru
Posts: 1219
Joined: Wed Apr 01, 2009 6:08 pm

Re: hif38 into a 410

Post by Henry » Mon Sep 27, 2010 7:34 pm

ROBBIE wrote:hello on my old 1.3 it had a pipe that just hung down, never seemed to lose fuel.

Thats the overflow. mine hangs too.


There should be no return from the su.

And make sure you blank off the return fuel line on the chassis rail, as if you wade you could get water in fuel.
Top
Post Reply

Return to “Engine”