Page 1 of 1

Jimny bodykit panel pin help

Posted: Mon Apr 25, 2016 1:20 am
by mmac78
Hi guys,

the side skirt on the jimny has come off. A friend stepped on it while getting out and it has obviously fallen off before and replaced with dodgy panel pins.

I now have a small problem of finding a set of the correct plastic trim panel pins to attach it back. I tried a few I had but nothing was suitable.

Any ideas what the actual pins are called?

Any help would be greatly appreciated!
Thanks all.

Re: Jimny bodykit panel pin help

Posted: Mon Apr 25, 2016 12:39 pm
by zook123
Trim clips, they are about £4 each!

I've replaced mine with self tapping screws!

Re: Jimny bodykit panel pin help

Posted: Mon Apr 25, 2016 6:43 pm
by ROBBIE
Self tappers the way to go

Re: Jimny bodykit panel pin help

Posted: Mon Apr 25, 2016 7:19 pm
by Darrell
Give number 16 a Google.
Readily available on fleabay and cheap.

Re: Jimny bodykit panel pin help

Posted: Mon Apr 25, 2016 10:56 pm
by mmac78
I tried 16 (part number 09409-07332), they are push pins. They attach the skirt on the underneath. The clips that push into the trim & sill are different from those. I think I may have the right one, found 10 on ebay & with some luck might work!

Will keep the thread updated as to how I do :)

Thanks for the input.