Re: Jordi's 1988 Samurai Build
Posted: Sat Jun 22, 2013 10:31 pm
- image.jpg (2.52 MiB) Viewed 4149 times
- image.jpg (2.71 MiB) Viewed 4149 times
Suzuki Club UK
Home of all things Suzuki 4x4
https://suzukiclubuk.co.uk/forum/phpBB3/
Jordis 1988 Samurai (Re)Build
https://suzukiclubuk.co.uk/forum/phpBB3/viewtopic.php?t=1545
Page 34 of 85
Re: Jordi's 1988 Samurai Build
Posted: Sat Jun 22, 2013 11:47 pm
Looking good
Re: Jordi's 1988 Samurai Build
Posted: Sun Jun 23, 2013 12:04 am
THE rainbow sj
Re: Jordi's 1988 Samurai Build
Posted: Sun Jun 23, 2013 12:26 am
Nuthing wrong with a patchwork car
Re: Jordi's 1988 Samurai Build
Posted: Sun Jun 23, 2013 12:39 am
Skittles mo-fo!
Re: Jordi's 1988 Samurai Build
Posted: Sun Jun 23, 2013 12:45 am
Taste the rainbow 
Re: Jordi's 1988 Samurai Build
Posted: Sun Jun 23, 2013 12:12 pm
Wwwwiiiiiiiiddddddddddeeeeee think I would loose the wheels spacers, I think your wheel bearings will want you as well 
Re: Jordi's 1988 Samurai Build
Posted: Sun Jun 23, 2013 12:15 pm
Just whipped the spacers of now Scottie.
As said needs the sills trimming a bit for some clearance. On the flat lock to lock its not fouling on the chassis or springs though.
It may now be the time to move the front axle forward and shim it.
As said needs the sills trimming a bit for some clearance. On the flat lock to lock its not fouling on the chassis or springs though.
It may now be the time to move the front axle forward and shim it.
Re: Jordi's 1988 Samurai Build
Posted: Sun Jun 23, 2013 1:11 pm
Ace. I need to get this shed built so I can get back on with the zook.
Re: Jordi's 1988 Samurai Build
Posted: Sun Jun 23, 2013 4:01 pm
Cheers for the kind words chaps. Its getting there.
I just need to get my fingure out and do some body work. The plan is to cut out the sills again, looking as it i dont think it effects the actual body, just the box section. That SHOULD be a quick job. Cut the ends and box in again.
New front clip, bit of a time consuming one as it needs virtual lifting and patching to fit.
Wheels to finish wite brushing, prime, and spray satin black.
I could do with a few spare days, last time it was all properly bodged together. I'd like to take a bit more time when i redo it. I'm hoping i'll do a better job of it as i think i'm a bit more experienced this time round. We'll see.
Till i get that done i'll just do more temporary bodges.
Edit :- i'm back at work again now warminster bound. Another weekend gone.
I just need to get my fingure out and do some body work. The plan is to cut out the sills again, looking as it i dont think it effects the actual body, just the box section. That SHOULD be a quick job. Cut the ends and box in again.
New front clip, bit of a time consuming one as it needs virtual lifting and patching to fit.
Wheels to finish wite brushing, prime, and spray satin black.
I could do with a few spare days, last time it was all properly bodged together. I'd like to take a bit more time when i redo it. I'm hoping i'll do a better job of it as i think i'm a bit more experienced this time round. We'll see.
Till i get that done i'll just do more temporary bodges.
Edit :- i'm back at work again now warminster bound. Another weekend gone.