Page 2 of 2

Re: Making my Suzuki sj 410 to electronic distributer

Posted: Tue Apr 15, 2014 10:23 am
by ROBBIE
ScottieJ wrote:
twiss wrote:Im using a dizzy with a 1.3 gear in my 16v... can't be that different ;)
yes with the correct housing for the dizzy and an adapter, it's not the teeth that are different.

Image
That explains what I was talking about

Re: Making my Suzuki sj 410 to electronic distributer

Posted: Tue Apr 15, 2014 10:29 am
by twiss
Ahhhh the pokey out bit... think its worth putting the pokey out one on if it fits...
I have had a few dizzys on mine so far. One of them seems to get jammed up every now and again but Im not sure which one it is... possibly the one without the pokey bit

Will have a look for any evidence to support this when I go out to the garage :)

Re: Making my Suzuki sj 410 to electronic distributer

Posted: Tue Apr 15, 2014 10:25 pm
by dazerede
Ok we'll just picked up a 1.3 dizzy and 1.3 coil so might have a go at doing it Tmoz