SJ413 1989 Ignition Module - Where?

Got an electrical gremlin? Ask the question here.
Post Reply
marcusj
Got muddy boots
Got muddy boots
Posts: 3
Joined: Sun Aug 24, 2014 10:04 am

SJ413 1989 Ignition Module - Where?

Post by marcusj » Sun Aug 24, 2014 10:08 am

Hi

I'm buying an SJ413 here in Spain. I need an ignition module (the black box thingumies that are attached to the distributor that replace the function of the points on an older vehicle). The module in the vehicle I'm looking at is blown. I've tried the local Suzuki dealer who says that there are no new parts. The local scrap yards are drawing a blank.

I need to source one from, e.g. mail order from U.K. or does anybody know any alternatives, e.g. an equivalent part I could pull off another vehicle that should fit the distributor or an aftermarket kit or from a scrap specialist? The unit comprises a pickup coil connected to a module containing the transistor switching module that switches the low tension side of the coil.

I just need something to get going - I'd even fit an old points style distributor if that would get me going - after that I can work on a less-bodgy solution - if necessary!

Cheers

Marcus

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: SJ413 1989 Ignition Module - Where?

Post by Darrell » Sun Aug 24, 2014 11:49 pm

I can't find anybody selling the generator assembly. I think you may be best to try and find a used distributor complete and use it or rob the part required.
Attachments
dizzy.png
dizzy.png (235.36 KiB) Viewed 7077 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: SJ413 1989 Ignition Module - Where?

Post by Darrell » Mon Aug 25, 2014 12:01 am

On some I believe the generator and ignitor are connected by 2 screws (as shown above) but not listed as separate part numbers.
Mine are soldered together like this
Attachments
20140406_143405_zps44a43791.jpg
20140406_143405_zps44a43791.jpg (83.87 KiB) Viewed 7074 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Rhinoman
Suzuki Guru
Suzuki Guru
Posts: 1034
Joined: Tue Mar 26, 2013 5:42 pm
Location: Brinkworth
Contact:

Re: SJ413 1989 Ignition Module - Where?

Post by Rhinoman » Mon Aug 25, 2014 8:12 pm

I think the 'Do not Remove' marking gives a clue as to why its not available separately, I would recommend seeking out a used, complete, distributor.
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: SJ413 1989 Ignition Module - Where?

Post by Darrell » Mon Aug 25, 2014 8:40 pm

I always assumed "do not remove" ment the dust covers ?? ;)
2005-GV 1600se, "Hell" What do I know!

marcusj
Got muddy boots
Got muddy boots
Posts: 3
Joined: Sun Aug 24, 2014 10:04 am

Re: SJ413 1989 Ignition Module - Where?

Post by marcusj » Mon Aug 25, 2014 9:41 pm

Would an SJ410 distributor fit? Or an older, points-style distributor (assuming that earlier MY's had those) from SJ413 fit? I want to widen my net!

marcusj
Got muddy boots
Got muddy boots
Posts: 3
Joined: Sun Aug 24, 2014 10:04 am

Re: SJ413 1989 Ignition Module - Where?

Post by marcusj » Tue Aug 26, 2014 11:19 am

Jordi! You tried to send me a PM, matey. Apparently I'm not 'sufficiently active' on the forum to be allowed to even read a PM yet. :(
Last edited by marcusj on Tue Aug 26, 2014 12:02 pm, edited 1 time in total.

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: SJ413 1989 Ignition Module - Where?

Post by Jordi » Tue Aug 26, 2014 11:52 am

Should be able to read it now.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

Post Reply