vitara sort out

[RickUK]

Thats starting to look very nice,i bet you will need a bigger engine to drag all that extra metal around that you have welded in

[shredder]

haha just wait till ive done my bumper (mostly angle iron ) although I do wonder about the engine power I know its only a 1.6 but considering they seem to be constructed from biscuit tins it does seem rather sluggish is this normal?

[shredder]

did some work on the small chassis holes today there is one on the other side to but the wind was interfering with my welding!

Photo0146b.jpg (403.48 KiB) Viewed 7570 times

not quite sure what to do about the hole at the front of the arch for now im just gonna leave it not sure whether to just rivet a patch over the hole or try welding something in? but of a sod of a shape!

Photo0148.jpg (280.8 KiB) Viewed 7570 times

started on my bumper think its going to take some thinking got an idea in my head just need to get it into metal

Photo0149.jpg (403.71 KiB) Viewed 7570 times

Photo0151.jpg (376.95 KiB) Viewed 7570 times

[shredder]

bit more bumper work

Photo0155.jpg (336.47 KiB) Viewed 7552 times

bit windy again today so tacked it up with my arc then welded it up with the mig (only 2 rods left for arc) in my coal shed

Photo0157.jpg (489.42 KiB) Viewed 7552 times

Photo0158.jpg (349.45 KiB) Viewed 7552 times

Photo0159.jpg (356.74 KiB) Viewed 7552 times

Photo0161.jpg (368.99 KiB) Viewed 7552 times

this is what im working towards seen here lovingly crafted in cardboard and ductape

Photo0165.jpg (357.37 KiB) Viewed 7552 times

[Anton]

I like that! I'm going to redo my front bumper eventually, and I'll probably do something similar, tapering down to a skid plate. Maybe.

[shredder]

well not had a chance to do any more welding but added my trade mark stickers haha

DSCF8024.JPG (337.92 KiB) Viewed 7507 times

one thing you will notice here is where the previous owner has painted over the high level brake light presumably to pass an MOT

m.jpg (78.81 KiB) Viewed 7507 times

I took the unit out with the view to replacing it, eh yeah right! oh how silly I was to think you could find one of these so I took the unit to bits and found out why only 4 LEDs were illuminating

Photo0152b.jpg (264.31 KiB) Viewed 7507 times

I cleaned the paint off the lens and as you can see also managed to break it into three bits while taking it apart

Photo0153.jpg (205.6 KiB) Viewed 7507 times

ordered me one of these, 24cm LED strip

Photo0172.jpg (306.28 KiB) Viewed 7507 times

now unfortunately I managed to loose one of the bits I broke off at the mounting so decide I might manage to make something up with this

Photo0174.jpg (183.63 KiB) Viewed 7507 times

fortunately and completely by chance when I went out to go to the shop for some superglue there was the offending article sitting beside my path (I had looked for it for three days!!)

Photo0177.jpg (167.27 KiB) Viewed 7507 times

so there we go lens back together, LEDs installed, unit glued back together and she's sorted

Photo0178.jpg (215.8 KiB) Viewed 7507 times

Photo0179.jpg (203.56 KiB) Viewed 7507 times

Photo0180.jpg (586.33 KiB) Viewed 7507 times

[Anton]

I want a high level brake light like that for my SJ...

Maybe I should make one like you have.

[shredder]

Photo0182.jpg (303.5 KiB) Viewed 7469 times

got some new(ish) boots!

Photo0190.jpg (300.5 KiB) Viewed 7469 times

bit more bumper work

Photo0202.jpg (307.88 KiB) Viewed 7469 times

Photo0203.jpg (317.63 KiB) Viewed 7469 times

Photo0204.jpg (483.24 KiB) Viewed 7469 times

Photo0205.jpg (385.99 KiB) Viewed 7469 times

[shredder]

wishbones finally on who thought it would be a great design to have to remove the drive shaft to get ball joint in?? , got my new shiny track rods to go in now

Photo0244.jpg (338.53 KiB) Viewed 7427 times

Photo0247.jpg (296.34 KiB) Viewed 7427 times

Photo0252.jpg (348.26 KiB) Viewed 7427 times

Photo0250.jpg (474.61 KiB) Viewed 7427 times

Photo0256.jpg (291.05 KiB) Viewed 7427 times

Photo0291.jpg (290.1 KiB) Viewed 7427 times

[Rhinoman]

Those wishbones are quite rotten, I did find that the standard wishbones were always full of mud.