Project KJA
- ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
hi, no i never took it out.
the manifold was bought in, not the one that came with the enigine - so as far as i know fairys could have nicked it.
i shall get one and stick it in.
cheers chaps
the manifold was bought in, not the one that came with the enigine - so as far as i know fairys could have nicked it.
i shall get one and stick it in.
cheers chaps
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
- ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
Hi,
Been hard at it today...
Fitted the thermostat after testing it, job done,can now fill the system.
Finished all the brake lines just need to fill and bleed, but cant find the clips to hold the flexi hoses to the chassis, does any one know where I can get some?
All the calipers, disks, pads are all on, spacers on. Looks better with a wider stance now. Tested fan, fitted box for relay but just need to finish wiring it all up. Put the grill and lights on to have a look, need to paint it but not sure what colour, think I might go black like the original. Need to get the adjuster screws out for the lights, they are solid. Cheers
Ian
Been hard at it today...
Fitted the thermostat after testing it, job done,can now fill the system.
Finished all the brake lines just need to fill and bleed, but cant find the clips to hold the flexi hoses to the chassis, does any one know where I can get some?
All the calipers, disks, pads are all on, spacers on. Looks better with a wider stance now. Tested fan, fitted box for relay but just need to finish wiring it all up. Put the grill and lights on to have a look, need to paint it but not sure what colour, think I might go black like the original. Need to get the adjuster screws out for the lights, they are solid. Cheers
Ian
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Project KJA
Looks better black to me.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
Yea, I think so.. Paint is required then.
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Project KJA
Satin black? I think gloss would be a bit too much.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
Yep. Sounds good.
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: Project KJA
Looks good mate
Keep up the good work
Keep up the good work
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
- ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Project KJA
Black. I do like the shape of the black one, flat headlight surrounds, never seen one like that
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
- Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: Project KJA
I agree, satin black looks sweet. I'm so jealous of this truck.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.