1.6 8v into sj410 1983
1.6 8v into sj410 1983
I was wondering if anyone could help me as im having abit of trouble mounting my gearbox as its a 1983 model. Can anyone ponit me in the right directon or show me some pics?? Cheers
Re: 1.6 8v into sj410 1983
I know there's a thread on here about it. basically you have to put the top bolts in, and screw a stud in the engine and a bolt through the gearbox for the bottom, and then weld them together using some 10mm bar to span the gap. I'll try to find some pics for you
It's not a question of how much you spend on your suzuki, but when your money will run out
Re: 1.6 8v into sj410 1983
check down this page, shows you how to do. just realized though, you might have some trouble fitting the 1.0 gearbox, this method uses the 1.3 gearbox, which would suit the engine better anyways. hope this helps you
http://forum.suzukiclubuk.co.uk/vi ... 9&start=20
http://forum.suzukiclubuk.co.uk/vi ... 9&start=20
It's not a question of how much you spend on your suzuki, but when your money will run out
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: 1.6 8v into sj410 1983
Are u using the.1.3 gear box or 1.6
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Re: 1.6 8v into sj410 1983
if it was a 1.6 he wouldn't have no trouble fitting it
It's not a question of how much you spend on your suzuki, but when your money will run out
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: 1.6 8v into sj410 1983
Mounting gearbox to.engine or to.chassis?
If it's an '83 the chassis mounts are different.
If it's an '83 the chassis mounts are different.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Re: 1.6 8v into sj410 1983
I got the 1.3 box on it but ive got the old sj410 so its not got the same gearbox mount as the 1.3s
Re: 1.6 8v into sj410 1983
To the chassis
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: 1.6 8v into sj410 1983
I understand what I.are saying as from1985 410s onwards the 413 gear box bolts straight in give me a min as I will have a little search on the net
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: 1.6 8v into sj410 1983
Have a look through this mate I know it is a suzuki LG80 but it is pretty much the same
http://forum.suzukiclubuk.co.uk/vi ... =12&t=3855
http://forum.suzukiclubuk.co.uk/vi ... =12&t=3855
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT