what should i go for...
Re: what should i go for...
looks like im gonna need 2 killer chimps
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: what should i go for...
supprised they dont come in the kit
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
- urbanzook
- Winching along now
- Posts: 526
- Joined: Tue Jul 08, 2008 8:04 pm
- Location: stevenage
- Contact:
Re: what should i go for...
no there extra.
i find a toad more deterring.
and more avalibel
i find a toad more deterring.
and more avalibel
- Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: what should i go for...
i cant knock the calmini kit, i went for the 3.5" lift with the 2" reverse shackle and the 1.5" lifted springs, on the road the suspension is harder than standard but its excpected with stronger leaves, im still bedding mine in, steering wise, iot comes with a 'drop pitman' arm that dropps your steering arm down to compensate for the reverse shackle, and keeps the steering like standard also the kit comes with an anti roll bar (if you want to fit it) which keeps on road steering virtually the same as a standard sj, and because the springs are stiffer they compensate for the ride height, so body roll is just about the same as normal. The only thing that would stop me having another calmini kit, is the articulation, although it gives the lift the articulation isn't as good as i excpected, id say its on a par to normal (if not slightly worse) but that may be because im using the anti roll bar and its a well known fact that if you remove the bar the articulation is much better
Luke
Luke
Re: what should i go for...
cheers for that luke
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need