Scottie's Zuke. Blue
-
ROBBIE
- I spend far too much time on here
- Posts: 4553
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Scottie's Zuke
You live too far away
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
Re: Scottie's Zuke
I will have my SJ ready for this weekend 
All the old brackets have been cut off, the perches lengthened and new locating holes drilled for the 410 spring spacing. U-bolt plates have been modded to match the U-bolt width. Now just need to weld on some shock mounts, paint it, swap some 26 spline sidegears into the diff on the floor in front of my Sj, fit the axle and bleed the brakes.
I can do all that in 3 evenings
All the old brackets have been cut off, the perches lengthened and new locating holes drilled for the 410 spring spacing. U-bolt plates have been modded to match the U-bolt width. Now just need to weld on some shock mounts, paint it, swap some 26 spline sidegears into the diff on the floor in front of my Sj, fit the axle and bleed the brakes.
I can do all that in 3 evenings
-
Jordi
- Bow down before me
- Posts: 7534
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Scottie's Zuke
Like it. Knew you'd get it done Scott.
Looking forward to seeing it as i've never seen a full float actually fitted and in use before.
Looking forward to seeing it as i've never seen a full float actually fitted and in use before.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
-
turbo-tom
- I spend far too much time on here
- Posts: 4478
- Joined: Fri Jun 25, 2010 9:29 pm
- Location: West Sussex
Re: Scottie's Zuke
Feel free is kick me up the arse. But may I ask why you changing axles? 
Tom 
Ford Fiesta ST
Ford Fiesta ST
Re: Scottie's Zuke
Because a fucked diff and shot wheel bearing was the final kick up the arse to get this axle fitted, I've been meaning to do it for agesturbo-tom wrote:Feel free is kick me up the arse. But may I ask why you changing axles?
Next job after this is to build the ARB up into another diff and fit the external cage ready for wagtail.
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Scottie's Zuke
Get that cage fitted!!! It's been too long!! 
ITS NOT LEAKING OIL...........SHE'S MARKIN HER TERRITORY!!!!!!!!
my ride.........
+2 lift....grizzley boots is all i need!
my ride.........
+2 lift....grizzley boots is all i need!
Re: Scottie's Zuke
Yes it has!!!!!4eye wrote:Get that cage fitted!!! It's been too long!!
Added the shock mounts and slapped some primer on tonight. Tomorrow night it'll be painted in hammered black (as usual) and ill build up the diff for it Then Friday night will be spent fitting the axle and getting the brakes sorted
let's hope it all goes to plan so I can see everyone on the lanes on Saturday. 
Re: Scottie's Zuke
I'm on target, just finished up in the workshop. tomorrow night is gonna be a busy one!
