SJ 410 tin top rear seat belts
Re: SJ 410 tin top rear seat belts
No problem hope these help if u need any more just ask
- Attachments
-
- 20130605_201306.jpg (1.79 MiB) Viewed 7129 times
-
- 20130606_063314.jpg (2.51 MiB) Viewed 7129 times
-
- 20130606_063342.jpg (2.21 MiB) Viewed 7129 times
-
- 20130606_063400.jpg (2.5 MiB) Viewed 7129 times
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
Re: SJ 410 tin top rear seat belts
Allso mine is a import so could be the reson
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
Re: SJ 410 tin top rear seat belts
Thanks again Windsor. Going by your pic just what the doctor ordered.
that mounting point or rear wheel arch, I have not got one, any chance of photo under the carpet. Guess there must be some sort of plate inside and one under wheel arch. Could you have a look to see how done as that point is not normally ideal for a seatbelt mount point. Do you recon it is original suzuki work ?.
thanks
Steve
that mounting point or rear wheel arch, I have not got one, any chance of photo under the carpet. Guess there must be some sort of plate inside and one under wheel arch. Could you have a look to see how done as that point is not normally ideal for a seatbelt mount point. Do you recon it is original suzuki work ?.
thanks
Steve
Re: SJ 410 tin top rear seat belts
Sorry to go on but go to get this right as it is for my little kids so no mistakes allowed.
Steve
Steve
Re: SJ 410 tin top rear seat belts
Dont worry about it steve ill have a look for you
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
Re: SJ 410 tin top rear seat belts
Bolted throgh the arches
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: SJ 410 tin top rear seat belts
Well I never. Must be a rare option!
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
penpontgreenwoodwork
- Got muddy boots
- Posts: 36
- Joined: Fri Mar 01, 2013 2:45 pm
- Location: Brecon
- Contact:
Re: SJ 410 tin top rear seat belts
Put a pair of SJ front 3 point inertia belts in the back of mine yesterday. Spool half way up, pivot above that (as in pictures above). End of belt fitted to prethreaded hole about 2" away from rear body mount. Mine had had a plate welded in the rear corner covering the hole but the captive nut could be seen from beneath so I could measure where to drill through the plate from above. I'd guess all SJ's must have these holes, they're inline with the belt socket mounting holes in the centre. Hope this is helpful.
They don't make cars like they used to!
SJ 413, tin top.
Sammy front axle.
2"? lift Springs on front, shackles on rear.
On the road
SJ 413, tin top.
Sammy front axle.
2"? lift Springs on front, shackles on rear.
On the road
Re: SJ 410 tin top rear seat belts
thanks for the input guys.
Now I understand how to do just got to find some good used belts of right length.
Will be putting inertia types in using the already there four bolt holes along rear of floor by door and 3 on each rear side panels.
will be at least a couple of months as away but when I get it done will post pics.
Steve
Now I understand how to do just got to find some good used belts of right length.
Will be putting inertia types in using the already there four bolt holes along rear of floor by door and 3 on each rear side panels.
will be at least a couple of months as away but when I get it done will post pics.
Steve