Onother Suspension question

Post your questions about your suspension and steering problems here!
Post Reply
User avatar
ektoz
Engaged 4wd low
Engaged 4wd low
Posts: 153
Joined: Fri Apr 19, 2013 10:59 am
Location: Paphos, Cyprus
Contact:

Onother Suspension question

Post by ektoz » Sat Apr 20, 2013 9:06 am

Hi guys, i know there are a lot of Suspension questions here, sorry apout that :shock:

I want to get a softer suspenion for comfort.
i have now on:
all stock front, and rear rancho springs with one more leaf at the bottom.
i have also some homemade shackles, but they are rock hard i think is now 1.5 inches high
i was thinking to get a 2 inch calmini leafs i found them at a vvery good price (150 euro 128uk) for compleate 4 corners used, and i will use the stock shackles.

but will it be more hard on the road? what will you guys recommend?
Don't grow up, it's a trap
My build thread:
http://www.suzukiclubuk.co.uk/forum1/vi ... hp?t=10402

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Onother Suspension question

Post by Jordi » Sat Apr 20, 2013 9:39 am

I think calmini springs are rock hard.

To get a softer ride you need longer springs. Rears up front and rascal rears, or like Scottie and Ferris YJ springs.

Softer shocks may also help.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Onother Suspension question

Post by ScottieJ » Sat Apr 20, 2013 11:18 am

What Jordi said, calmini springs are known for being very stiff.

A lot of lift springs are unfortunately, old man emu are probably the softest.

Another option is to run rears up front and then longer shackles on the rear to even the height or anus CJ/YJs on the rear with ruf etc.
Zuki Build

Steady as she goes!

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Onother Suspension question

Post by Jordi » Sat Apr 20, 2013 11:20 am

Probably a bit expensive to ship but i find Llama 4x4 springs pretty comfy.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
ektoz
Engaged 4wd low
Engaged 4wd low
Posts: 153
Joined: Fri Apr 19, 2013 10:59 am
Location: Paphos, Cyprus
Contact:

Re: Onother Suspension question

Post by ektoz » Sat Apr 20, 2013 11:57 am

i was thinking run rears front but i will need the 2 inch height also, here in cyprus
you get the same price for stock leaf springs and the price of a aftermarked one.
yep they are expensive to ship here, is vey hard to find the same parts as you guys,
i checked the Llama 4x4 and and they are very nice man! Jordi can you please get a quote
for how much will cost to ship to cyprus? used or new i dont care.
Scottie what you got on your rig mate?
Don't grow up, it's a trap
My build thread:
http://www.suzukiclubuk.co.uk/forum1/vi ... hp?t=10402

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Onother Suspension question

Post by Jordi » Sat Apr 20, 2013 12:31 pm

He's running YJs on custom spring mounts and shackles.

Longer springs also give more flex. Sam16v is running CJ springs i think.

If you e-mail Dave @ Llama i'm sure he'd quote direct to ship to you.
Last edited by Jordi on Sat Apr 20, 2013 12:34 pm, edited 1 time in total.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Onother Suspension question

Post by Jordi » Sat Apr 20, 2013 12:33 pm

What sort of budget have you got?
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Onother Suspension question

Post by ScottieJ » Sat Apr 20, 2013 2:37 pm

I run YJs all round, might be worth dropping Cyprus Geoff a message, I think he is planning on doing a YJ swap and he's also in Cyprus.

This is mine with the YJs spua and 9.5" travel shocks (need some 12" travel shocks really I think)

On road comfort is awesome with YJs :mrgreen:
Attachments
image.jpg
image.jpg (245.39 KiB) Viewed 7366 times
Zuki Build

Steady as she goes!

User avatar
ektoz
Engaged 4wd low
Engaged 4wd low
Posts: 153
Joined: Fri Apr 19, 2013 10:59 am
Location: Paphos, Cyprus
Contact:

Re: Onother Suspension question

Post by ektoz » Sat Apr 20, 2013 3:53 pm

WOW that YJ are awesome!! i see lot of youtube videos, i thing i get that ones all around,
YJ are for the anus wrangler??, yeap man i will send Cyprus Geoff a message.
my budget is apout 400 i need to save money for going Lathe lessons in Lithuania.
here is what i have now.

Image
Don't grow up, it's a trap
My build thread:
http://www.suzukiclubuk.co.uk/forum1/vi ... hp?t=10402

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Onother Suspension question

Post by Jordi » Sat Apr 20, 2013 4:38 pm

YJs are a good swap. Readily available most places. Rocky road in america do a bolt on kit. From what i can gather off Scott so long as you are ok with metal work its not too major to make your own kit.

I had a good look at Scotts the other week and it's well tidy. Had a little drive and does feel softer than mine. Not really a fair comparison though as they are two completely different machines.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

Post Reply