Newbie here
Newbie here
Hello, recently purchased an SJ so thought I would introduce myself on here
I found my SJ on the Ebay site and after watching the bidding stuck in a bid and got the beastie
So what did I get!
I'm now the 10th owner of a Black (sport) 1987 Suzuki SJ410 Santana.
Needless to say it requires a bit of work! The first thing I did was to drive the anus to the MOT station. Well lets just say, its got issues!
On first impressions the car did not look too bad, but after buying the car and driving it down the road it became clear there were a few things that need sorting out.
1, the windscreen wipers did not work.
2, the headlights did not work unless you twisted the stalk and pulled it back to click on main beam
3, It leaks rather badly ....Found unplugged holes all over the bulkhead, floor pan and other areas
5 interior light not working
4, handbrake did not work
6, Electrical issues
7 paintwork is a bit tired and believe it or not I found a couple of rust spots
8 rear bumper and rear light clusters falling apart.
9 driving/spot lamps not wired up on roo bar.
10 lower dash broken (cracked plastic)
11 there are a few other issues too but I think the list could go on and on
But in spite of all the above, I like it.
The plan is to return this SJ into a fun street cruiser for my son as his first car.
I'm only a DIY enthusiast type guy and not a trained mechanic, but hopefully folks on here will be able to steer me in the right direction on where to get parts and additional services when needed? Ive generally done my own servicing of cars, mainly because Ive not really been able to afford main dealer prices.
Cheers Fatboy 18.
I found my SJ on the Ebay site and after watching the bidding stuck in a bid and got the beastie
So what did I get!
I'm now the 10th owner of a Black (sport) 1987 Suzuki SJ410 Santana.
Needless to say it requires a bit of work! The first thing I did was to drive the anus to the MOT station. Well lets just say, its got issues!
On first impressions the car did not look too bad, but after buying the car and driving it down the road it became clear there were a few things that need sorting out.
1, the windscreen wipers did not work.
2, the headlights did not work unless you twisted the stalk and pulled it back to click on main beam
3, It leaks rather badly ....Found unplugged holes all over the bulkhead, floor pan and other areas
5 interior light not working
4, handbrake did not work
6, Electrical issues
7 paintwork is a bit tired and believe it or not I found a couple of rust spots
8 rear bumper and rear light clusters falling apart.
9 driving/spot lamps not wired up on roo bar.
10 lower dash broken (cracked plastic)
11 there are a few other issues too but I think the list could go on and on
But in spite of all the above, I like it.
The plan is to return this SJ into a fun street cruiser for my son as his first car.
I'm only a DIY enthusiast type guy and not a trained mechanic, but hopefully folks on here will be able to steer me in the right direction on where to get parts and additional services when needed? Ive generally done my own servicing of cars, mainly because Ive not really been able to afford main dealer prices.
Cheers Fatboy 18.
- plugspanner
- Engaged 4wd low
- Posts: 179
- Joined: Tue Nov 20, 2012 4:35 pm
- Location: somerset
- Contact:
Re: Newbie here
welcome from a fellow ne suz owner
Re: Newbie here
Thanks
Re: Newbie here
to :suzuki:clubUK matey.
Sounds like your going to be busy! I hope you can weld sjs are about as easy as it gets to work on so I'm sure you'll have no problems sorting everything out.
pretty much all the info and advice you'll ever need to do with a suzuki sj can be found on here
Sounds like your going to be busy! I hope you can weld sjs are about as easy as it gets to work on so I'm sure you'll have no problems sorting everything out.
pretty much all the info and advice you'll ever need to do with a suzuki sj can be found on here
- Jordi
- Bow down before me
- Posts: 7534
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Newbie here
Welcome to the club. Certainly sounds like a project.
As scottie says nothing is easier to work / practice mechanics on than an SJ.
Where abouts are you based?
Jordi
As scottie says nothing is easier to work / practice mechanics on than an SJ.
Where abouts are you based?
Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Newbie here
Hi to ownership as said they are so easy to work on and what ever parts you need shouldnt be hard to find . Now all we need is pics
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: Newbie here
Welcome
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Re: Newbie here
to the club .
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Re: Newbie here
Thanks for all the replies guys
Ive got my teeth into it already,
First thing I did was to get the anus up on axle stands / ramps.
I disconnected the rear prop shaft and dismantled the Hand brake drum on the back of the transfer box. Needless to say there was not a lot of meat left on the Brake shoes!
After searching eBay and local car accessory shops I had all but given up trying to find replacement brake shoes. My local auto accessory shop managed to order me a replacement set but when they turned up they did not have the arm fitted to them and I was not happy with the hole positions, even though the guy in the shop insisted they were the correct ones! I ended up ordering a set from Suzuki.
Well they made it to the local dealer, then all of a sudden the dealership went bust! (no I'm not making this up, it was Epsom Motor Group) and I could not get my hands on the new shoes.
So with plan B out the window I resorted to plan C. After searching on the Internet, I found a place in Bedfordshire that re-lines the original brake shoes. One week later, New shoes in hand and each new lining cost a massive £5.00 So all in £10 + vat and postage, Bargain.
I'm located just inside the M25 near Reigate in Surrey
The rear bumper (what was left of it) was rotten, i found evidence of glass fibre and shoddy workmanship all over the place. I managed to buy a brand new rear bumper from Suzuki (£100) and have also fully rebuilt the rotten rear light clusters. The windscreen frame was very rotten so I found a replacement via eBay for £50 with everything attached, wipers motor screen etc.
So how do I post pics on here? Do I have to open an account with photobucket or something?
Oh ... Welding and electrics are not really things I'm very good at, I used an Arc welder once and....Well lets just say it was messy :(
I do need welding done on the anus and I want new steel put in place of the rusty bits. I don't do plastic padding and fibreglass to cover holes
Cheers Mark.
Ive got my teeth into it already,
First thing I did was to get the anus up on axle stands / ramps.
I disconnected the rear prop shaft and dismantled the Hand brake drum on the back of the transfer box. Needless to say there was not a lot of meat left on the Brake shoes!
After searching eBay and local car accessory shops I had all but given up trying to find replacement brake shoes. My local auto accessory shop managed to order me a replacement set but when they turned up they did not have the arm fitted to them and I was not happy with the hole positions, even though the guy in the shop insisted they were the correct ones! I ended up ordering a set from Suzuki.
Well they made it to the local dealer, then all of a sudden the dealership went bust! (no I'm not making this up, it was Epsom Motor Group) and I could not get my hands on the new shoes.
So with plan B out the window I resorted to plan C. After searching on the Internet, I found a place in Bedfordshire that re-lines the original brake shoes. One week later, New shoes in hand and each new lining cost a massive £5.00 So all in £10 + vat and postage, Bargain.
I'm located just inside the M25 near Reigate in Surrey
The rear bumper (what was left of it) was rotten, i found evidence of glass fibre and shoddy workmanship all over the place. I managed to buy a brand new rear bumper from Suzuki (£100) and have also fully rebuilt the rotten rear light clusters. The windscreen frame was very rotten so I found a replacement via eBay for £50 with everything attached, wipers motor screen etc.
So how do I post pics on here? Do I have to open an account with photobucket or something?
Oh ... Welding and electrics are not really things I'm very good at, I used an Arc welder once and....Well lets just say it was messy :(
I do need welding done on the anus and I want new steel put in place of the rusty bits. I don't do plastic padding and fibreglass to cover holes
Cheers Mark.
- turbo-tom
- I spend far too much time on here
- Posts: 4478
- Joined: Fri Jun 25, 2010 9:29 pm
- Location: West Sussex
Re: Newbie here
welcome to the club fella im just down the m23 in brighton , hope you have a good laugh in your sj once its done
Tom
Ford Fiesta ST
Ford Fiesta ST