justaddmud's kja build (code named MK5)
- ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: justaddmud's kja build (code named MK5)
Tidy, because I haven't driven mine properly I don't know if it's worth doing while I'm rebuilding it all. Would be good if you could let me know. Cheers
Sent from my iPad using Forum Runner
Sent from my iPad using Forum Runner
- justaddmud
- Can I have a tow
- Posts: 286
- Joined: Sun Oct 23, 2011 8:08 pm
- Location: Ashford, Kent
Re: justaddmud's kja build (code named MK5)
what size tyres are you going to be running when finished?
i found mine with 235's pretty usable on and offroad without PAS, i just always wanted to do the conversion.
will let you know how it goes
i found mine with 235's pretty usable on and offroad without PAS, i just always wanted to do the conversion.
will let you know how it goes
- justaddmud
- Can I have a tow
- Posts: 286
- Joined: Sun Oct 23, 2011 8:08 pm
- Location: Ashford, Kent
Re: justaddmud's kja build (code named MK5)
found a couple of pics from an event i did last year, and if i could find my flashdrive, would have a bucket load more too
![Image](http://i92.photobucket.com/albums/l33/bonnerworld/MK5%20KJA/001.jpg)
![Image](http://i92.photobucket.com/albums/l33/bonnerworld/MK5%20KJA/002.jpg)
![Image](http://i92.photobucket.com/albums/l33/bonnerworld/MK5%20KJA/001.jpg)
![Image](http://i92.photobucket.com/albums/l33/bonnerworld/MK5%20KJA/002.jpg)
- ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: justaddmud's kja build (code named MK5)
Um, I haven't looked to be honest. I'll look on Friday. You need to find those pics.
Cheers Ian
Cheers Ian
- ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: justaddmud's kja build (code named MK5)
I had I look tonight while was doing my bearings and me tires are 235/75 R15 technic amazon.
Cheers Ian
Cheers Ian
- Attachments
-
- image-1027971352.png (902.13 KiB) Viewed 6756 times
- justaddmud
- Can I have a tow
- Posts: 286
- Joined: Sun Oct 23, 2011 8:08 pm
- Location: Ashford, Kent
Re: justaddmud's kja build (code named MK5)
Ahh same size as me then, well probably not this weekend, but next weekend, i will have all my EPAS setup and working so can let you know what it is like
wasn't bad before, only when steering stopped on the brakes made it hard to turn.
wasn't bad before, only when steering stopped on the brakes made it hard to turn.
- ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: justaddmud's kja build (code named MK5)
Tidy, hope it works well for you.
Cheers Ian
Cheers Ian
- justaddmud
- Can I have a tow
- Posts: 286
- Joined: Sun Oct 23, 2011 8:08 pm
- Location: Ashford, Kent
Re: justaddmud's kja build (code named MK5)
Hopefully it will, especially as I now have this on my desk
![Image](http://i92.photobucket.com/albums/l33/bonnerworld/bdcbd73a.jpg)
it is quite chunky, worried it may have too much offset, but we will see
also added the final peice to the exhaust, some bling
![Image](http://i92.photobucket.com/albums/l33/bonnerworld/cb2bf17b.jpg)
quite amazed that came out at all, was very dark,
will need a bit of fiddeling as that is only rested over the old pipe, but even so adds a distinctive touch
![Image](http://i92.photobucket.com/albums/l33/bonnerworld/bdcbd73a.jpg)
it is quite chunky, worried it may have too much offset, but we will see
also added the final peice to the exhaust, some bling
![Image](http://i92.photobucket.com/albums/l33/bonnerworld/cb2bf17b.jpg)
quite amazed that came out at all, was very dark,
will need a bit of fiddeling as that is only rested over the old pipe, but even so adds a distinctive touch
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: justaddmud's kja build (code named MK5)
Looking good.
I need to get out on mine but cant strip the front clip in drizzle!
Make sure you let us know how the steering goes
Dan
I need to get out on mine but cant strip the front clip in drizzle!
Make sure you let us know how the steering goes
Dan
![Image](http://i291.photobucket.com/albums/ll288/dan_2k_uk/33SIG_zpse27c5da7.png)
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
- justaddmud
- Can I have a tow
- Posts: 286
- Joined: Sun Oct 23, 2011 8:08 pm
- Location: Ashford, Kent
Re: justaddmud's kja build (code named MK5)
the weather is such a pain isn't it, i have used a pop up gazeebo before now on the drive
first problem is going to be the mounting of the pump, and the fact that the eeejot that took the pump out cut the wire with only about 1cm left
and i have to get a 70 amp relay too, that is how much they pull aparently
first problem is going to be the mounting of the pump, and the fact that the eeejot that took the pump out cut the wire with only about 1cm left
and i have to get a 70 amp relay too, that is how much they pull aparently