4eyes DAL (b&b)

Post by **ScottieJ** » Thu Oct 13, 2011 11:06 pm

They look pretty cool matey

gonna look like little rocket boosters on the back of the SJ

Post by **dan_2k_uk** » Fri Oct 14, 2011 12:12 am

they look well good mate.

keep up the good work. lookin forward to seein them fitted!

Newtomud · Post by **Newtomud** » Fri Oct 14, 2011 6:00 pm

Very trick piece of kit you've made there

4eye · Post by **4eye** » Sat Oct 15, 2011 9:36 pm

hi yall.....just checking in with todays progress......i started with the number plate to see what kinda space i had after,,,

i borrowed a holesaw kit off work....cut the hole smaller then wizzed out to suite a tight fit as the fixing holes were pretty dam close to the edge

all holes drilled and managed to not hit any pillers

time to fit the lights....

painted them black to blend in as the silver stood out too much

now that was all fitted i needed to put the speaker board back in the tailgate but had to pack it out as it now fouled on the lights.....so made a frame

put throgh holes in the pillers for the electrics

all done......!!!! just need someone to figure out what wires what as i jus cant remember!!!

And look scottie....i saved the sticker

Post by **ScottieJ** » Mon Oct 17, 2011 2:27 pm

I think they look a bit better black actually

and nice work, means I don't have to force you to buy another one

4eye · Post by **4eye** » Mon Oct 24, 2011 7:22 pm

ThEy NoW tWiNkLe!!!

but i was told i may need a block fog light!???? is that true!???

4eye · Post by **4eye** » Sat Oct 29, 2011 5:23 pm

spent a few hrs on the old girl today....finished the wiring for the fag lighter for the tom tom, made a bracket for the fog light,fitted and all wired up on bullet connecters so its easy to remove and rewire the tail gate fog . took off the rear section of the exhaust to take in to work to fill a lil hole. did a much needed oil change and noticed one my fuel line on the carb has weathered to the point of no return so needs replacing. so that and a few other things on the todo list for next saturday inc the breaks.

no pics of todays work as my phone dint save what i took........

dazerede · Post by **dazerede** » Sat Jan 07, 2012 9:36 pm

nice work mate like the heavy duty bumpers u made good job

Post by **dan_2k_uk** » Sat Jan 07, 2012 9:53 pm

I might be wrong on this but aint the indicator lamps supposed to be the closest to the outside of the vehicle.

Looking good though. Cant see there being a problem with that fog. The only rules are on the drivers side of in the center of the vehicle.

Dan

4eye · Post by **4eye** » Sun Jan 22, 2012 11:08 pm

dazerede wrote:nice work mate like the heavy duty bumpers u made good job

ta muchly......was well chuffed with them when i finished them

dan_2k_uk wrote:I might be wrong on this but aint the indicator lamps supposed to be the closest to the outside of the vehicle.

Looking good though. Cant see there being a problem with that fog. The only rules are on the drivers side of in the center of the vehicle.

Dan

I did bring that up when it was being wired but if there is i problem with it then its only a few rivits and a couple of snips to put it right

Suzuki Club UK

4eyes DAL (b&b)

Re: My sheila

Re: My sheila

Re: My sheila

Re: My sheila

Re: My sheila

Re: 4eyes DAL (b&b)

Re: 4eyes DAL (b&b)

Re: 4eyes DAL (b&b)

Re: 4eyes DAL (b&b)

Re: 4eyes DAL (b&b)

test