Anti roll bar???
-
- Got muddy boots
- Posts: 20
- Joined: Fri Oct 10, 2008 4:44 am
- Location: Bradford, West Yorkshire
Anti roll bar???
im lost on this one my sammy came with an anti roll bar but i want to take it off for more articulation but ive been told if i take it off then it will fail the mot shall i take it off after the mot and what will it handle like without it as it will be used as a daily driver too.
IF IN DOUBT GIMME A SHOUT
Re: Anti roll bar???
i dont think its a mot failure mine passed last year without it but then as with most mots it depends on the mood of the tester...
if you take it off just take it easy when cornering and you should be fine i've had no problems with mine
if you take it off just take it easy when cornering and you should be fine i've had no problems with mine
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: Anti roll bar???
Its a 5 min job to remove (provided the bolts havn't seized) and refit, jus keep it in the shed and if MOT man does have a problem refit it.
Dan
Dan
http://www.suzukiclubuk.co.uk the new home for your suzuki sj
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Anti roll bar???
handles fine without it. i can do little drifts on really wet days without to much body roll. mine also went through the mot without it.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: Anti roll bar???
Or cut the brackets off so mr MOT cant see something is missing.
- urbanzook
- Winching along now
- Posts: 526
- Joined: Tue Jul 08, 2008 8:04 pm
- Location: stevenage
- Contact:
Re: Anti roll bar???
mine passed mot with out. just expect more body roll slow own for sharp corners.
if i try an do dow nuts it lifts one wheel.
if i try an do dow nuts it lifts one wheel.