winch plate

lil monster · Post by **lil monster** » Wed Jul 29, 2009 9:18 pm

winch plates are these essential if fitting a winch to front bumper....my bumper already a cusom made one and made of quite thick steel

http://s516.photobucket.com/albums/u330 ... =018-2.jpg

carnut · Post by **carnut** » Wed Jul 29, 2009 9:26 pm

you need a plate really, you must bolt it to the end chassis holes along with a welded plate. if you dont, you will end up ripping the holes open. if your not sure pm me your e-mail and ill send some pics.. andy

carnut · Post by **carnut** » Thu Jul 30, 2009 12:07 am

got your replys,. your winch needs to be idealy just above the chassis legs, or if its higher make sure you weld in some sort of fillets, when you start winching the strain on the bumper/winch plate/chassis fixings,, (you start to wonder if something is going to give,, espesally when you pull another vehical out of a ditch).
andy

lil monster · Post by **lil monster** » Fri Jul 31, 2009 12:09 pm

will email you some pix of front bumper as its not removable and all welded to chasis, so hoping with plate and some under reinforcement it shuld be ok...

arnie · Post by **arnie** » Tue Apr 26, 2011 10:29 pm

got me worried now what u meaning by winch plate ? under the winch or something ?

ROBBIE · Post by **ROBBIE** » Tue Apr 26, 2011 10:55 pm

arnie its this http://www.winchsolutions.co.uk/index.a ... roduct&id=" onclick="window.open(this.href);return false;{DD9BB075-B07F-4726-BC0A-1CDF64B620C3} (go to bumpers& mountings, its the last item on list) i use 1 cos mines not a winch bumper

arnie · Post by **arnie** » Wed Apr 27, 2011 10:33 pm

i see thanks i need to make one into my bumper or make a new one so i can fit my winch i quite like the rock cralwer type but i havent seen any pics of an sj one but ill figure it out

Suzuki Club UK

winch plate

winch plate

Re: winch plate

Re: winch plate

Re: winch plate

Re: winch plate

Re: winch plate

Re: winch plate

test