Sj Brake Master Cylinder

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
Famerbennie
Engaged 4wd low
Engaged 4wd low
Posts: 114
Joined: Mon Apr 25, 2011 2:23 pm
Location: Chelmsford

Sj Brake Master Cylinder

Post by Famerbennie » Sat May 26, 2018 1:53 pm

Hi all think i need to replace the brake master on the trusty sj. The two pipes come out the bottom of the master at the moment. Are there any others i can use ie vitara etc. Many thanks

User avatar
Famerbennie
Engaged 4wd low
Engaged 4wd low
Posts: 114
Joined: Mon Apr 25, 2011 2:23 pm
Location: Chelmsford

Re: Sj Brake Master Cylinder

Post by Famerbennie » Tue Jul 31, 2018 5:23 pm

Are all sj master cylinders the same?

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Sj Brake Master Cylinder

Post by Jordi » Tue Jul 31, 2018 7:59 pm

Whats the actual problem with your existing one?

There are different versions but without looking i can’t remember the specifics.

Thinks its like brake calipers, a jap version and a spanish version.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Sj Brake Master Cylinder

Post by andyrew » Tue Jul 31, 2018 9:34 pm

Servo or non Servo?

Jap or Spanish?

On a sj413 or sami
Aluminium it's jap
Black and rusty steel it's spanish
Andys Rusty Suzuki Emporium

User avatar
Famerbennie
Engaged 4wd low
Engaged 4wd low
Posts: 114
Joined: Mon Apr 25, 2011 2:23 pm
Location: Chelmsford

Re: Sj Brake Master Cylinder

Post by Famerbennie » Wed Aug 01, 2018 5:56 pm

Servo on a 410 santana if that helps.

I think the seals gone inside as pedal goes almost to the floor but if pumped a couple of times it gets better.

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Sj Brake Master Cylinder

Post by Jordi » Wed Aug 01, 2018 6:09 pm

Its not low on brake fluid?

No air in the brake lines?

Brake fluid leaks?
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Sj Brake Master Cylinder

Post by andyrew » Wed Aug 01, 2018 8:17 pm

Double pumping, I'd expect a sticky caliper with worn out pads (discs maybe on the minimum) or shoes that have worn think.

Does the pedal creep down slowly when you hold the brakes ?
Andys Rusty Suzuki Emporium

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Sj Brake Master Cylinder

Post by andyrew » Wed Aug 01, 2018 8:19 pm

And yes. Spanish masters are fooking expensive!
Andys Rusty Suzuki Emporium

Post Reply