How do you get the sunroof soft top bar out of the actual fabric itself? I was just going to do some quick rust work on the frame as it’s pretty fucked, however a 5 minute job quickly turned into hours of getting nothing done.
Can’t find any help videos online so any help would be great, cheers.
Jimny sunroof section
Re: Jimny sunroof section
Just undo the poppers and slide off 
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT
Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk
-
SlimGrim
- Winching along now
- Posts: 510
- Joined: Tue Oct 13, 2015 3:39 pm
- Location: Norwich Norfolk
- Contact:
Re: Jimny sunroof section
That's what the manual says too ffs XD his seems to be stitched at the side and the top, meaning you can't slide up? Seems way too tight to pry it over the bar too?
___________________
1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)
1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)
-
SlimGrim
- Winching along now
- Posts: 510
- Joined: Tue Oct 13, 2015 3:39 pm
- Location: Norwich Norfolk
- Contact:
Re: Jimny sunroof section
It's stitched in the two places shown, meaning it can't move up or down more than half an inch or so :/
- Attachments
-
___________________
1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)
1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)