Bowser. LWB J20a + 03-72LE & 33s

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Lwb daily drive and laner build

Post by ScottieJ » Wed Nov 01, 2017 8:49 pm

Cheers :thumbup:

It’s copper rich Upol weld #2 primer. I use it on any overlapping seam before welding just for that extra bit of rust prevention.
Zuki Build

Steady as she goes!
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Lwb daily drive and laner build

Post by ScottieJ » Tue Nov 07, 2017 9:44 pm

So I had a bit of an issue with one of the panels, it had some oil canning and a high spot that refused to shrink after a few hours of panel beating so out came the angle grinder. Not ideal but I want the body on this as close to perfect as possible, unfortunately it meant cutting out a section I had already done.
0F48D1AA-3530-4448-AA00-E6654DDEF048.jpeg
0F48D1AA-3530-4448-AA00-E6654DDEF048.jpeg (1.13 MiB) Viewed 15339 times
45EB7DB8-A417-469B-AB1D-22E6C6851275.jpeg
45EB7DB8-A417-469B-AB1D-22E6C6851275.jpeg (297.14 KiB) Viewed 15339 times
Started slowly tacking it on and working the steel between each tack to stretch out any shrinking.
E2251A34-3785-4D96-9A1D-9BE955675D61.jpeg
E2251A34-3785-4D96-9A1D-9BE955675D61.jpeg (1.28 MiB) Viewed 15339 times
Will slowly be welding it up next time I’m at the unit.
Zuki Build

Steady as she goes!
Top
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 879
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Lwb daily drive and laner build

Post by kiwizook » Wed Nov 08, 2017 8:02 am

did you try shrinking it by heating and quenching with a oxy/acetalyne torch? we did that on my sj, seems to work a treat, fairly tricky to get it perfect, bit of a knack to figure out where to heat and quench though
It's not a question of how much you spend on your suzuki, but when your money will run out
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Lwb daily drive and laner build

Post by ScottieJ » Wed Nov 08, 2017 8:38 am

Yeah I use that method quite a bit, it got it close but I wasn’t happy with it, seemed to just get to a point where it wouldn't shrink anymore with that panel, it was odd. :lol:
Zuki Build

Steady as she goes!
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Lwb daily drive and laner build

Post by ScottieJ » Thu Nov 09, 2017 11:50 pm

So far so good :mrgreen:
C8BD5473-FBB6-470C-8FFF-03C3739AEF6F.jpeg
C8BD5473-FBB6-470C-8FFF-03C3739AEF6F.jpeg (1.24 MiB) Viewed 15329 times
EC10EB4D-4224-45A2-8666-B1BA533C9B9B.jpeg
EC10EB4D-4224-45A2-8666-B1BA533C9B9B.jpeg (1.26 MiB) Viewed 15329 times
Zuki Build

Steady as she goes!
Top
SherwoodNash
Winching along now
Winching along now
Posts: 731
Joined: Sat Aug 09, 2014 11:05 am

Re: Lwb daily drive and laner build

Post by SherwoodNash » Fri Nov 10, 2017 1:11 pm

Nice work :thumbup:

I really love this thread, 'got to get into welding when I build a little workshop at my new place.
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Lwb daily drive and laner build

Post by Anton » Fri Nov 10, 2017 3:53 pm

SherwoodNash wrote:Nice work :thumbup:

I really love this thread, 'got to get into welding when I build a little workshop at my new place.
Not jealous of people who have their own workshop. Not jealous, not jealous, not jealous!!!

If I say it often enough...
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Lwb daily drive and laner build

Post by andyrew » Sat Nov 11, 2017 9:59 am

ScottieJ wrote:Cheers :thumbup:

It’s copper rich Upol weld #2 primer. I use it on any overlapping seam before welding just for that extra bit of rust prevention.
its great stuff, ive not used the copper version. only the zinc based one.

DO NOT EVER! buy the halfords own stuff. its just the worst, im certain its just standard primer.
it had a recall notice issued as it explodes apprently.
Andys Rusty Suzuki Emporium
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Lwb daily drive and laner build

Post by Anton » Sat Nov 11, 2017 1:04 pm

andyrew wrote: it had a recall notice issued as it explodes apprently.
There's a youtube video waiting to happen...
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1828
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: Lwb daily drive and laner build

Post by mike harris » Sat Nov 11, 2017 1:21 pm

Great work mate I'm impressed, very tidy

Can't wait to see it done and in the mud bud !
Top
Post Reply

Return to “Builds and Projects”