I've got my 1.6 8v in my sj, I've been driving it around for a couple of days now, I have setup the timing by ear and she's running okay, but I've just tried setting the timing with a timing light and at 8° she's almost ready to cut out (assuming the 1.6 8v is 8°??) Where I have her set by ear, the timing on the front cover & flywheel are reading way, way out, like around 40°.
Why?
1.6 8v timing
Re: 1.6 8v timing
Are you setting the timing with the vac advance unhooked and plugged?
I run mine at 10*btdc, I think most of us with the 8v do.
What carb are you running?
I run mine at 10*btdc, I think most of us with the 8v do.
What carb are you running?
Re: 1.6 8v timing
No I didn't, the vacuum advance wasn't working on the 1.3 so I never bothered, not even sure it's plumbed up right on the su hif44.
Anyway, I forgot to block the vacuum advance
Anyway, I forgot to block the vacuum advance
Re: 1.6 8v timing
Sorry to dig up an old post !
But do you plug the vacuum from the carb whilst setting the timing
No mention of it in the manual I dropped the revs down
And set the timing at 10
But do you plug the vacuum from the carb whilst setting the timing
No mention of it in the manual I dropped the revs down
And set the timing at 10
-
timwilks13
- SCUK Website Padawan
- Posts: 1248
- Joined: Sun Feb 03, 2013 5:55 am
- Location: Scarborough, soon to be Poland
Re: 1.6 8v timing
You need to block off the vac advance from the distributor when setting the timing.
1986 SJ410 - Furry dice, new window winder.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
Re: 1.6 8v timing
Balls 
Il do it again don’t take long
Il do it again don’t take long