OLD CARB TO SU

Got an electrical gremlin? Ask the question here.
Post Reply
kim&luke
Got muddy boots
Got muddy boots
Posts: 14
Joined: Sat May 29, 2010 6:31 pm

OLD CARB TO SU

Post by kim&luke » Sun Sep 05, 2010 6:44 pm

Hi All ive got a question about putting a SU Hiff 38 in to a sj 410 santanna. as the asian carb has a stop solenoid in it and didnt know where this would go with the SU carb ??????
Any help would be great

Pugsley
Engaged 4wd low
Engaged 4wd low
Posts: 111
Joined: Tue Aug 18, 2009 10:41 pm
Location: N. Devon

Re: OLD CARB TO SU

Post by Pugsley » Mon Sep 06, 2010 12:08 am

The stop solonoid you describe becomes redundant along with the old carb.

User avatar
Tramp
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2828
Joined: Fri Jul 25, 2008 10:09 pm
Location: Rotherham - South Yorkshire

Re: OLD CARB TO SU

Post by Tramp » Mon Sep 06, 2010 3:38 pm

the stop solenoid just has one wire to it, with the su it doesn't have one so you leave the wire loose (or hook it up back in the loom with a bit of tape around in case you decide to put a standard carb back on it)

kim&luke
Got muddy boots
Got muddy boots
Posts: 14
Joined: Sat May 29, 2010 6:31 pm

Re: OLD CARB TO SU

Post by kim&luke » Thu Sep 09, 2010 4:38 pm

ok thanks guys im am also trying to get hold of the kit in one of the articles in the diy bit but cant seem to find any i have sent a email to greg at sj410.co.uk as it says on the web site that they are all sold out any ideas guys????

User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: OLD CARB TO SU

Post by ScottieJ » Fri Sep 10, 2010 2:16 pm

you don't need a kit, it will bolt straight on, you just need to make a bracket for the choke and throttle cables if it hasn't already got one :mrgreen:
Zuki Build

Steady as she goes!

Post Reply