Overheating

Engine not running right? see if we can help you!
Post Reply
Mdw
Got muddy boots
Got muddy boots
Posts: 42
Joined: Thu Oct 16, 2014 8:49 pm

Overheating

Post by Mdw » Wed Mar 11, 2015 9:27 pm

Having trouble with my SJ getting hot

It's a 1.6 vitara engine on an su carb and it's gets hot under Load, especially on fast roads.
There's no thermostat in it and it has an electric fan.

I changed the rad to vitara one but it made no difference, rad has no cold spots so don't believe it's blocked.

I've changed the rad cap still no change.

There's no mayo under the oil cap and it doesn't appear to lose water

Where should I look next? Water pump? Head gasket?

User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:

Re: Overheating

Post by Ladaman » Wed Mar 11, 2015 9:34 pm

I had a cooling problem, and it came down to a trapped hose. from the top of the water pump.

The identifier was the bottom hose wasn't getting hot. Is yours?
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Overheating

Post by Jordi » Wed Mar 11, 2015 9:43 pm

Is the matrix properly clean?

Have you got coolant / anti freeze in or just water?
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

Mdw
Got muddy boots
Got muddy boots
Posts: 42
Joined: Thu Oct 16, 2014 8:49 pm

Re: Overheating

Post by Mdw » Thu Mar 12, 2015 5:33 am

It does have coolant in but it does need changing
All hose are hot

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Overheating

Post by twiss » Thu Mar 12, 2015 10:27 am

I would try and flush all the coolant through... Make sure your heater is set to hot when you fill it up otherwise it can trap air in the system

I am running a 1.6 16v engine with the 1.3 rad and an electric fan and there is plenty of cooling
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Overheating

Post by ScottieJ » Thu Mar 12, 2015 11:25 am

Are you running the correct temperature sender? You need to run the one from the Sj so that its resistance matches the temperature gauge. People often leave the vitara sender on the engine and the gauge reads completely wrong.

So it's not blowing the water out when it gets hot then? That's a good sign. I would try the sender (get one for your car using the reg/vin) and if it's still reading hot investigate further.

Ps you should never run without a thermostat, it's there to regulate the engine temperature so that the engine runs as the optimum temperature. Yes it's ok to pull it in emergencies and you need to get home with cooling issues but refit it as soon as the problem is solved.
Zuki Build

Steady as she goes!

Mdw
Got muddy boots
Got muddy boots
Posts: 42
Joined: Thu Oct 16, 2014 8:49 pm

Re: Overheating

Post by Mdw » Sat Mar 14, 2015 5:58 pm

Quick update
Flushed and replaced the coolant but it still started to get hot. Temp stArted to creep up got to 3/4 before I turned it off. Still haven't fitted thermostat as beed supplied the wrong one!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Overheating

Post by ScottieJ » Sun Mar 15, 2015 5:31 pm

Did you check what I have mentioned above?? About the temperature sender for the gauge? Is it the original one with the engine or the one that was on the original 1.3. It needs to be the one from the 1.3 I.e. The one that matches the original electrics.
Zuki Build

Steady as she goes!

Mdw
Got muddy boots
Got muddy boots
Posts: 42
Joined: Thu Oct 16, 2014 8:49 pm

Re: Overheating

Post by Mdw » Sun Mar 15, 2015 11:40 pm

ScottieJ wrote:Did you check what I have mentioned above?? About the temperature sender for the gauge? Is it the original one with the engine or the one that was on the original 1.3. It needs to be the one from the 1.3 I.e. The one that matches the original electrics.
How can I tell what sender it is? Or is it a case of just buying the correct one?

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Overheating

Post by ROBBIE » Mon Mar 16, 2015 8:55 am

I would buy a new 1.3 sender
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Post Reply