Post your questions about your suspension and steering problems here!
-
timwilks13
- SCUK Website Padawan
- Posts: 1248
- Joined: Sun Feb 03, 2013 5:55 am
- Location: Scarborough, soon to be Poland
Post
by timwilks13 » Thu Mar 12, 2015 10:39 pm
mike harris wrote:Yeh I snapped a full leaf spring, in half, half way down the spring, springs where 6 years old. You can't blame wrap on that, would have to wrap lol which it doesn't.
Anyway anti wrap bars are a great idea, all cars need them. Nissan and Toyota and every other manufacture that doesn't use them, should?....
Sorry lads !
Sorry mike I don't like arguing but your ignorance is getting annoying. You don't want to run an anti wrap bar then that's cool, but don't argue against logic with "I've never had a problem". Its fine you don't see that you get axle wrap, but when people want pros and cons regarding an issue, if you can't construct a logical reason you don't need one, then leave it be.
Everyone gets axle wrap. You get axle wrap.
1986 SJ410 - Furry dice, new window winder.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
-
NylonAdmiral
- Winching along now
- Posts: 521
- Joined: Wed Apr 03, 2013 8:39 pm
- Location: Devizes, Wiltshire
-
Contact:
Post
by NylonAdmiral » Thu Mar 12, 2015 10:47 pm
ScottieJ wrote:Plus hilux's actually have a bar on the front axle to stop wrap during heavy breaking.
Ahh that's it. I was racking my brain trying to remember one of the vehicles they came on as standard.
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!
-
mike harris
- SCUK is my life
- Posts: 1828
- Joined: Sat Jan 08, 2011 8:30 pm
- Location: hascombe Surrey
Post
by mike harris » Fri Mar 13, 2015 10:30 pm
If your that annoyed by my opinion you need to get a life chap.
-
timwilks13
- SCUK Website Padawan
- Posts: 1248
- Joined: Sun Feb 03, 2013 5:55 am
- Location: Scarborough, soon to be Poland
Post
by timwilks13 » Sat Mar 14, 2015 8:40 am
mike harris wrote:If your that annoyed by my opinion you need to get a life chap.
Not annoyed by your opinion, just don't like people giving incorrect and bad advice.
1986 SJ410 - Furry dice, new window winder.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
-
mattmiles
- Got muddy boots
- Posts: 51
- Joined: Mon May 13, 2013 5:23 pm
- Location: Tadworth, Surrey
Post
by mattmiles » Sat Mar 14, 2015 9:04 am
I've had great experiences with my anti wrap bar and would very much recommend one. Even with YJs (that I purchased new!), on a SPOA setup, wrap is an issue on the road. The rear end now feels more controlled/planted under acceleration, and should all help increase the life of the springs.
Matt
-
Attachments
-
- BAM1.jpg (226.77 KiB) Viewed 8747 times
-
SierraDan
- Got muddy boots
- Posts: 38
- Joined: Sun Jan 11, 2015 5:45 am
- Location: NSW, Australia
Post
by SierraDan » Sat Mar 14, 2015 9:12 am
Now that is a different take on a wrap bar!
-
d_r_1989
- Winching along now
- Posts: 523
- Joined: Tue Jul 08, 2014 1:49 pm
- Location: Halifax west Yorkshire
Post
by d_r_1989 » Sat Mar 14, 2015 9:54 am
You got any more pictures Matt?
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Post
by Anton » Sat Mar 14, 2015 9:56 am
Matt - that looks a lot like the anti wrap bar that I have. In my head.
How well does it work without the shackle? I don't fully understand the need for the shackle, I was thinking of building a setup that doesn't have one.
But I should probably find out why people that have awb's have shackles/don't have shackles before deciding that!
-
mattmiles
- Got muddy boots
- Posts: 51
- Joined: Mon May 13, 2013 5:23 pm
- Location: Tadworth, Surrey
Post
by mattmiles » Sat Mar 14, 2015 10:46 am
SierraDan wrote:Now that is a different take on a wrap bar!
I believe it's known as a Bam Bar matey!
Works very well Anton, but are you referring to the shackle in this design? This is very different to mine, and slightly more complex.
d_r_1989 wrote:You got any more pictures Matt?
Few more pics for you.
Matt
-
Attachments
-
- DSC00140.JPG (105.57 KiB) Viewed 8732 times
-
- BAM.png (636.22 KiB) Viewed 8732 times
-
ScottieJ
- The Boss
- Posts: 11620
- Joined: Tue Apr 15, 2008 12:13 pm
- Location: Chippenham, wiltshire
Post
by ScottieJ » Sat Mar 14, 2015 11:41 am
Anton as the springs flex the position of the axle changes, during compression the spring flattens the axle moves backwards slightly, further away from the chassis mount. During droop the spring arches more and the axle moves forwards. This is why a lot of people fit the shackle design to allow for this movement.
With the bam bar design you can get away without a shackle as long as you get the geometry of the upper link correct, I.e. The angle and length. otherwise it could actually force the axle to rotate slightly during flex, I.e force the pinion to tilt down during droop.
Adam did a mix of both designs so that axle wrap was limited instead of being completely stopped.
