- IMG_2927.jpg (330.93 KiB) Viewed 6968 times
Project KJA
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
tank touching the dif
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
- IMG_2924.jpg (215.82 KiB) Viewed 6961 times
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Re: Project KJA
Why did you move the tank?
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
the ram needed to go where the tank was, so I had to move it back a bit, but as it was spoa, it wasn't a problem.
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Re: Project KJA
What a nightmare after all the work that's been put into it. 
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
Not really, it is a pain but im happier with it lower, looks better. And probably will feel nicer to drive.
I've got some 75 x 50 box now, so all ive got to do is cut bits to go on the 6 bed supports and cut the rear tipping points off and add the box In between, will probably make it all to bolt on, will make less mess.
I've got an idea for another bed in the future so if I make the brackets bolt on, I've only got to build another frame,
I've got some 75 x 50 box now, so all ive got to do is cut bits to go on the 6 bed supports and cut the rear tipping points off and add the box In between, will probably make it all to bolt on, will make less mess.
I've got an idea for another bed in the future so if I make the brackets bolt on, I've only got to build another frame,
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Project KJA
- IMG_2955.jpg (303.62 KiB) Viewed 6898 times
- IMG_2956.jpg (330.97 KiB) Viewed 6898 times
- IMG_2957.jpg (305.94 KiB) Viewed 6898 times
- IMG_2958.jpg (316.55 KiB) Viewed 6898 times
- IMG_2959.jpg (343.57 KiB) Viewed 6898 times
- IMG_2960.jpg (322.56 KiB) Viewed 6898 times
- IMG_2962.jpg (357.31 KiB) Viewed 6898 times
just got to lift the tank, bit of paint, put the lights back on and job done.
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Project KJA
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
Jordi
- Bow down before me
- Posts: 7534
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Project KJA
So when do we all get to see this creature in the flesh?
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank