Sam's Samurai Project

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
User avatar
sam16v
Engaged 4wd low
Engaged 4wd low
Posts: 157
Joined: Sun May 09, 2010 9:48 am
Location: Swansea. South Wales

Sam's Samurai Project

Post by sam16v » Wed May 12, 2010 5:47 pm

Hi all new to the forum but had my zuk for about 6 months. Still yet to drive it. Bought it off ebay without even seeing it, turns out it had no engine a short MOT and overall was in a bit of a sorry state. Was intended to be a cheap toy but ive got a bit of a habit of geting carried away with things..
Image
Image
Image
Bit of a root around and was pleseantly suprised by small amount of rust! small patch on one outer sill, windsceen surround and front panel. Set about stripping to almost a bare shell, all rust was cut out and replaced with good metal, a few dents were filled and soon enough she was ready for a respray.
Image
Image
Image
Image
Me and a mate converted my lock up into a make shift spray booth, then time for the paint job. Turned out better than i had expected mainly due to the poly paint we used. Under body was treated to a shed load of underseal!
Image
Image
Then time for the fun bits , set about reassembly cleaning or replacing parts as i went.
Image
Image
Fitted an engine from a low mileage 1998 Vitara complete with fuel injection, Immobliser etc
Image
Image
Image

Time for a lift! made up my on saddes for a spoa, Llama Add a leafs, extended both props, , Vitara Power steering conversion along with mercedes high steer, After lots of saving decided to bite the bullet and purchased the 33-12.5 Kumho Kl71's on 10 inch rims. Which neccesated fitting a pair of Vitara Ring and pinions to sort the gearing.
Image
Image
Image
Image
A few little jobs left to do then time for the MOT. Need to get a spare wheel for it, and a few more mods planned. Heres how she sits at the moment.
Image
Image
Image
Image
Cant wait to drive it let me know what you lot think and look forward to meeting some fellow suzuki enthusiasts!

User avatar
Tramp
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2828
Joined: Fri Jul 25, 2008 10:09 pm
Location: Rotherham - South Yorkshire

Re: Sam's Samurai Project

Post by Tramp » Wed May 12, 2010 6:10 pm

Great build, I think I remember seeing this on difflock, I can remember the hazard warning tape on the bullbar :lol: You have really gone to town with this, And I like it alot, I do have a thing for tin top sj's and yours is great,

Keep up the good work

User avatar
albertross74
Can I have a tow
Can I have a tow
Posts: 322
Joined: Tue Jan 05, 2010 5:53 pm
Location: Guernsey/Brighton
Contact:

Re: Sam's Samurai Project

Post by albertross74 » Wed May 12, 2010 7:36 pm

jesus christ, that looks bad ass as fuck mate!

Definitely up there in the top 5 nicest 'zukis I've ever seen!
1988 Suzuki SJ413 hard-top with 235/75/r15 General Grabber AT2s & AAL
http://www.flickr.com/photos/albertross74/
http://www.myspace.com/picturesbyalasdairround

User avatar
ScottieJ
The Boss
The Boss
Posts: 11614
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Sam's Samurai Project

Post by ScottieJ » Thu May 13, 2010 2:07 pm

Wecome to SCUK matey! I was following that build on difflock as well, must say i'm very impressed with the standard of work it is one hell of a tidy result! just out of interest what paint did you use for it?

Are there any more plans for the future?
Zuki Build

Steady as she goes!

User avatar
sam16v
Engaged 4wd low
Engaged 4wd low
Posts: 157
Joined: Sun May 09, 2010 9:48 am
Location: Swansea. South Wales

Re: Sam's Samurai Project

Post by sam16v » Thu May 13, 2010 2:25 pm

thanks for all the replies! yeah did start a build thread on difflock but dont go on there much, threads seem to repeat themselves every few weeks, and it gets boring. Promise i will keep this thread upto date though am liking SCUK.
Have got a few plans for it....
Tempted by a set of Mudbuster wheel arch extensions from the states (keep the old bill happy)
I have a 410 transfer box that may be going on depending on how the gearing is?
also have a Low mileage vitara 16v engine, ecu and loom etc that may get tweaked and put in if the 8v struggles?
Lots of little plans but basically want to keep it looking like a tidy Samurai with a lift, but with reliabilty and hopefully driveability
Image

User avatar
sam16v
Engaged 4wd low
Engaged 4wd low
Posts: 157
Joined: Sun May 09, 2010 9:48 am
Location: Swansea. South Wales

Re: Sam's Samurai Project

Post by sam16v » Thu May 13, 2010 2:27 pm

Oww sorry scottie Paint is a super tough polyurethane paint as used by the MOD. Very hard to scratch is almost like a plastic coating
Image

User avatar
ScottieJ
The Boss
The Boss
Posts: 11614
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Sam's Samurai Project

Post by ScottieJ » Thu May 13, 2010 3:50 pm

is it from pronto paints by any chance? if not could you let me know as i might get some (not the same colour) for my missus sj build.
Zuki Build

Steady as she goes!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11614
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Sam's Samurai Project

Post by ScottieJ » Thu May 13, 2010 5:10 pm

Cheers for the PM it does sound like it's pretty similar to the paints that pronto paints produce as they are single pack Polyurethane based paints. have a look here http://www.prontopaints.co.uk/products/military.html

I used their paint for mine but in true offroader fashion I rollered it on :lol: will be spraying th missus sj though as it wont be seeing as much offroading as mine does. I find it handy to be able to touch up scratches with a paint brush :lol: and still blend in with the crap finish :lol:

also where abouts in the country are you from?
Zuki Build

Steady as she goes!

User avatar
sam16v
Engaged 4wd low
Engaged 4wd low
Posts: 157
Joined: Sun May 09, 2010 9:48 am
Location: Swansea. South Wales

Re: Sam's Samurai Project

Post by sam16v » Thu May 13, 2010 5:25 pm

Yeah thats it mate 537 was the colour if i remember correctly? good stuff easy to use too. And im in Swansea. South wales
Image

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Sam's Samurai Project

Post by Edweird » Thu May 13, 2010 5:57 pm

Carried away is good!!! You truck looks amazing. It's like a miniature monster truck! Awesome work there. Cangratulations. :mrgreen:
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

Post Reply