Steering Box

A place for all UK LJ owners to introduce themselves and for all LJ series tech and builds
Post Reply
Tonypp
Got muddy boots
Got muddy boots
Posts: 53
Joined: Sat Jan 25, 2014 5:02 pm

Steering Box

Post by Tonypp » Tue Feb 18, 2014 7:56 pm

The Cyprus rebuild going ok on the LJ . Engine, gearbox, transfer rebuilt, propshafts with new UJs, steering joints done but now comes the problem. I intended to rebuild the steering box, I have got the new bearings seals bush but it looks like the box has been filled with mud and that has pitted the worm drive pretty badly. Has anybody got a tidy worm drive that they want to sell ? ( I know the manual says chuck the old box one away and replace but where's the challenge in that?)

juncopartner
Engaged 4wd low
Engaged 4wd low
Posts: 137
Joined: Fri Dec 30, 2011 1:53 pm
Location: York

Re: Steering Box

Post by juncopartner » Wed Feb 19, 2014 12:12 pm

I have at least 8 spare boxes all in good condition. Never had to replace or repair one yet.

Tonypp
Got muddy boots
Got muddy boots
Posts: 53
Joined: Sat Jan 25, 2014 5:02 pm

Re: Steering Box

Post by Tonypp » Thu Feb 27, 2014 6:47 pm

Tonypp wrote:The Cyprus rebuild going ok on the LJ . Engine, gearbox, transfer rebuilt, propshafts with new UJs, steering joints done but now comes the problem. I intended to rebuild the steering box, I have got the new bearings seals bush but it looks like the box has been filled with mud and that has pitted the worm drive pretty badly. Has anybody got a tidy worm drive that they want to sell ? ( I know the manual says chuck the old box one away and replace but where's the challenge in that?)
Played in a Nicosia scrapyard today with the intention of buying a steering box. But couldn't resist getting a few more bits. So came away with doors, bonnet, tailgate, seats and lots of hard to find odds and sods. my mate acquired the grill, lights and engine bits. A good morning but a shame to leave a battered but solid LJ just sitting there.
Attachments
WP_000032.jpg
WP_000032.jpg (851.83 KiB) Viewed 7117 times
WP_000037.jpg
WP_000037.jpg (680.12 KiB) Viewed 7117 times
WP_000041.jpg
WP_000041.jpg (880.16 KiB) Viewed 7117 times

User avatar
Tramp
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2828
Joined: Fri Jul 25, 2008 10:09 pm
Location: Rotherham - South Yorkshire

Re: Steering Box

Post by Tramp » Thu Feb 27, 2014 11:44 pm

Look at that body work! Far too good to scrap!

Tonypp
Got muddy boots
Got muddy boots
Posts: 53
Joined: Sat Jan 25, 2014 5:02 pm

Re: Steering Box

Post by Tonypp » Fri Feb 28, 2014 5:45 am

And pretty much all there before we started pulling bits off

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Steering Box

Post by Edweird » Fri Feb 28, 2014 12:39 pm

I like the wheels! Never seen that design before.
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Steering Box

Post by ROBBIE » Fri Feb 28, 2014 2:21 pm

The wheels look like some that I've seen on a few Daihatsu and they look the wrong way round, but that could just be me. Cant believe how good it looks
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Tonypp
Got muddy boots
Got muddy boots
Posts: 53
Joined: Sat Jan 25, 2014 5:02 pm

Re: Steering Box

Post by Tonypp » Fri Feb 28, 2014 2:52 pm

ROBBIE wrote:The wheels look like some that I've seen on a few Daihatsu and they look the wrong way round, but that could just be me. Cant believe how good it looks
I don't know what the wheels came from but I think they were cut and shut jobs, The centres cut out and rewelded the other way round.

Post Reply