Suzuki Club UK

I was wondering if anyone could help me as im having abit of trouble mounting my gearbox as its a 1983 model. Can anyone ponit me in the right directon or show me some pics?? Cheers

I know there's a thread on here about it. basically you have to put the top bolts in, and screw a stud in the engine and a bolt through the gearbox for the bottom, and then weld them together using some 10mm bar to span the gap. I'll try to find some pics for you

check down this page, shows you how to do. just realized though, you might have some trouble fitting the 1.0 gearbox, this method uses the 1.3 gearbox, which would suit the engine better anyways. hope this helps you
http://forum.suzukiclubuk.co.uk/vi ... 9&start=20

Are u using the.1.3 gear box or 1.6

if it was a 1.6 he wouldn't have no trouble fitting it

Mounting gearbox to.engine or to.chassis?

If it's an '83 the chassis mounts are different.

I got the 1.3 box on it but ive got the old sj410 so its not got the same gearbox mount as the 1.3s

To the chassis

I understand what I.are saying as from1985 410s onwards the 413 gear box bolts straight in give me a min as I will have a little search on the net

Have a look through this mate I know it is a suzuki LG80 but it is pretty much the same
http://forum.suzukiclubuk.co.uk/vi ... =12&t=3855