Page 1 of 7
rev counter fitted.. now to bring the revs down..
Posted: Mon Jul 22, 2013 6:25 pm
by Jay18
I have fitted a rev counter today, it works well but now when I start it, engine warm I have to rev it a couple of times to make it run, usually when I've driven it if I turn the engine off then turn the key it starts without using the choke, but now as I say, i have to rev it, pulling the choke right out doesn't do anything on a warm engine, does anyone know what could cause this? ..
Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 6:28 pm
by turbo-tom
What rev guage is it? Presume you have fitted it onto the coil? Few pictures would help.
Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 6:36 pm
by Jay18
I have got the feed for the rev counter from the negative on the cool, the power supply for the rev counter I have got from a switched wire from the ignition, the ground for the rev counter is grounded on the dash bar underneath the dash..
Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 6:57 pm
by mk1joe
have you tried disconnecting the rev counter to make sure that is your actual fault and not just a coincidence this fault occurred st the same time?
as i cant think of any reason why it would do that.
Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 7:09 pm
by Jay18
I will have to try that, I can't work out how it could cause that, I'll just have to see how it starts in the morning on a cold start, I will post a pic of it when I get on my laptop..
Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 7:47 pm
by dazerede
Can u tell me what the rev gauge is like and how good it is and also where did u get it from and how much Chears dude
Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 8:27 pm
by mk1joe
dazerede wrote:Can u tell me what the rev gauge is like and how good it is and also where did u get it from and how much Chears dude
doesnt sound all that good at the moment does it?
Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 9:21 pm
by Jordi
mk1joe wrote:dazerede wrote:Can u tell me what the rev gauge is like and how good it is and also where did u get it from and how much Chears dude
doesnt sound all that good at the moment does it?

valid point, well made.
Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 10:13 pm
by turbo-tom
Ive got a tim rev one has earth, pos and neg for the coil and another wire to light it up. Awesome stuff

Re: rev counter fitted, engine struggles to start now..
Posted: Mon Jul 22, 2013 10:58 pm
by ScottieJ
turbo-tom wrote:Ive got a tim rev one has earth, pos and neg for the coil and another wire to light it up. Awesome stuff

Most rev counters aren't wired to to the coil + only the coil - as a signal wire. The live feed for the gauge should be just wired to a switched live feed. Personally I wouldn't ever wire any accessories to the coil +
Jay the signal wire for the gauge is definitely wired to the - side of the coil isn't it? if not it could effect the ignition spark as it will short out.
Any chance of some pictures of how it's all wired.