Page 1 of 1
How hard is it to add a extra leaf??
Posted: Thu Mar 28, 2013 5:58 pm
by slaterfett
as the title pretty much say's. How are is it to fit a extra leaf to a set of SJ 413 leaf springs? Would anyone have some pictures or how to guides?
Cheers folks
Re: How hard is it to add a extra leaf??
Posted: Thu Mar 28, 2013 6:54 pm
by mk1joe
Are you looking at buying the add a leaf kit? Or using other leavs? If so the kit is very easy to fit.
Re: How hard is it to add a extra leaf??
Posted: Thu Mar 28, 2013 7:24 pm
by Edweird
Adding a leaf to a spring is easy. It's the rest of the job that's not so easy. You've got to undo the U-bolts and stuff to get at the spring.
Re: How hard is it to add a extra leaf??
Posted: Thu Mar 28, 2013 7:40 pm
by Jordi
Remove the spring completely from the Zuk.
There is one bolt right in the middle of the pack that holds it all together. Clamp the spring in a vice or with screw clamps and undo the bolt. Then gently undo the vice or clamps to release the tension.