Page 1 of 1

LJ80 DISTRIBUTOR

Posted: Thu Dec 08, 2011 9:44 pm
by pro4x4@hotmail.com
Anyone know if 1300 and 800cc dizzies are interchangeable??

Re: LJ80 DISTRIBUTOR

Posted: Thu Dec 08, 2011 10:02 pm
by ScottieJ
As far as I.m aware you need a 1.3 dizzy and coil, 1.3 coil doesn't have a ballast resistor like the 800cc

You also have to take account of the fact the 1.3 dizzy has vac advance but there is no vacuum take off on the carb on the 800. There are a few ways around that though, fitting stronger springs to the mechanical advance system etc or making a vac take off point.

Re: LJ80 DISTRIBUTOR

Posted: Fri Dec 09, 2011 1:00 pm
by ScottieJ
Wring for you and another note: make sure that you get a dizzy from a carb'd SJ413 the later SPI dizzy's won't work.

This should help
416+.jpg
416+.jpg (52.89 KiB) Viewed 5037 times