Suzuki Club UK

When I was stripping the chassis for paint I cut off all the old handbrake mounts (I have t-box brake now) and other odds and sods that were not needed.

I got a bit trigger happy with the grinder and thought I would loose the old front towing eye as it was causing the front bar to bend!

Just gone to put the steering back together and IT HAD THE STEERING DAMPER MOUNT ON IT!!!


Could someone please measure roughly how far across and low down the stud is supposed to be so I can make a new one up and weld it back on!!!

Thanks

D A N

just centre the steering and weld a mount on with the damper half open

I would suggest just tacking it on first though and checking it goes from lock to lock ok.

might wait till the body is on then so i can steer it by the wheel.

dan_2k_uk wrote:might wait till the body is on then so i can steer it by the wheel.

Just jack The front end up

lol classic, kinda thing i would do

We all do it.

I was cutting my transmission tunnel out and cut straight through my wiring loom Luckily I needed to do it anyway to re-route the wiring

Sorry, but this brought a big smile to my face. But im not laughing honest. Hope you get it sorted pal.

thanks dan i needed a good laugh mate

Cheers guys!