handbrake cable

bourneyo · Post by **bourneyo** » Tue Apr 22, 2008 11:23 pm

Right folks, i got round to doing my handbrake today, I have put a 410 t-box and transmission brake on a samurai, i have got the correct cable and the correct leaver. my problem is, were do i secure the cables outer casing to? when i pull the leaver the whole lot moves so surly the casing needs securing down to create the tension!

Dan

pepe-le-pieu · Post by **pepe-le-pieu** » Wed Apr 23, 2008 11:33 pm

HI Dan,
when I modified th sj into the blitz i ha dto change the fixing of the cable too. and i have a tb from a 410 as well.
so above the transfer box there is a cross member. if you put your brakecable along it starting at the hand brake the nuts are going to be near that cross member. you just have to get a L shaped plate, bolt it on the cross member and attach the cable to it.
I get some pics for you in the mean time i made a wee drawing if it canhelp

pepe-le-pieu · Post by **pepe-le-pieu** » Sat Apr 26, 2008 12:41 pm

here are the pics of the bracket. you will see on the 2nd pic where the old hand brake cable mounting was. hopeit helps

bourneyo · Post by **bourneyo** » Sat Apr 26, 2008 2:26 pm

cheers pepe thats a grate help!

just gota find time to do it now, and the HUGE amount of welding on the rear arches!

Dan

zook · Post by **zook** » Wed May 14, 2008 5:12 pm

that is a great help

as i is to doing this i have looked at it and tryed to find away with out doing a bracket but its no good
going to have to make a bracket like that
cheers karl

urbanzook · Post by **urbanzook** » Tue Jul 08, 2008 9:21 pm

HAY THINK OUT SIDE THE BOX MOVE THE HAND LEVER DRILL 4 NEW HOLES AND BOLT DOWN 10MIN JOB! AND THE HAND BRAKE LEVER IS DIF 2 I USED THE ONE FROM THE DONER WHERE I GOT THE T BOX FROM

Suzuki Club UK

handbrake cable

handbrake cable

Re: handbrake cable

Re: handbrake cable

Re: handbrake cable

Re: handbrake cable

Re: handbrake cable

test