Suzuki Club UK

Hi,

Changing my old heavily rusted front calipers, for new ones. Came across a Jimny caliper (Part Number - 55100-81A10) that looked very similar to my SJ410 caliper (Part Number - 55100-80010). Would this be compatible?

Both the brake disc thickness (10mm) and Piston Diameter (51mm) are the same on both calipers.

Any help or suggestions would be greatly appreciated.

I have attached some images below:
https://imgur.com/a/LLDFTta

Yes, Jimny calipers fit Japanese built Sjs that had aisin calipers.

ScottieJ wrote: ↑

Thu Mar 11, 2021 9:33 pm

Yes, Jimny calipers fit Japanese built Sjs that had aisin calipers.

Thanks for the reply, I have ordered some now. Will the original mounting bolt be long enough or will I need to use a Jimny bolt? The only reason I say this is because the caliper mounting bush looks thicker than my old SJ caliper?

I've attached a image of what I mean below.

https://imgur.com/sjVKBnq

Kind Regards

Oh actually now you mention it the slider might be a bit longer so you might need longer bolts, I seem to remember running into this when using jimny slider pins on sj calipers, i think.....it was a while back