Page 1 of 2
MOT
Posted: Fri Nov 13, 2020 8:49 pm
by border
Just about ready for MOT hoping to get it in one day next week, Think we have everything done, except a few things that we can do later , Ordered Speedo Cable not to bad of a job, I Hope. Gonna give the engine and chassis a good jet wash tomorrow.
we also need Coolant, whats the Right stuff for SJ 410, and how much should I put In ??
Thanks
Re: MOT
Posted: Sat Nov 14, 2020 7:32 pm
by maxaret
border wrote: ↑Fri Nov 13, 2020 8:49 pm
Just about ready for MOT hoping to get it in one day next week,
we also need Coolant, whats the Right stuff for SJ 410, and how much should I put In ??
Thanks
Good luck with the MOT Border.
Filling with new coolant from scratch ?Or has it still got some old stuff in ?
Re: MOT
Posted: Sat Nov 14, 2020 9:02 pm
by border
maxaret wrote: ↑Sat Nov 14, 2020 7:32 pm
border wrote: ↑Fri Nov 13, 2020 8:49 pm
Just about ready for MOT hoping to get it in one day next week,
we also need Coolant, whats the Right stuff for SJ 410, and how much should I put In ??
Thanks
Good luck with the MOT Border.
Filling with new coolant from scratch ?Or has it still got some old stuff in ?
From Scratch It just has plain water, in at the moment, no Coolant at all.
Thanks
Re: MOT
Posted: Sat Nov 14, 2020 9:20 pm
by donkeychomp
Drain the water asap or it could freeze...not a good idea! I use blue anti freeze using 50/50 with water. Keep it in all year round. You'll need to burp the system, ie fill it then leave the rad cap off and rev it a bit to expel any bubbles. And buying it on eBay is WAY cheaper than any motor factors!
Re: MOT
Posted: Sat Nov 14, 2020 9:54 pm
by border
donkeychomp wrote: ↑Sat Nov 14, 2020 9:20 pm
Drain the water asap or it could freeze...not a good idea! I use blue anti freeze using 50/50 with water. Keep it in all year round. You'll need to burp the system, ie fill it then leave the rad cap off and rev it a bit to expel any bubbles. And buying it on eBay is WAY cheaper than any motor factors!
Thanks Mate, I already have some Red but wasnt sure, so will get some blue. so how many litres does the 410 hold, altogether ?
Re: MOT
Posted: Sun Nov 15, 2020 8:21 am
by maxaret
According to an online database the 410 coolant capacity = 3.8 litre (6.7 pints).
Re: MOT
Posted: Sun Nov 15, 2020 1:18 pm
by border
maxaret wrote: ↑Sun Nov 15, 2020 8:21 am
According to an online database the 410 coolant capacity = 3.8 litre (6.7 pints).
Cheers Mate so 3 pints of Coolant and the rest Water sounds about right . I Think ?
Re: MOT
Posted: Sun Nov 15, 2020 3:08 pm
by maxaret
3 pints would be perfect
Re: MOT
Posted: Sun Nov 15, 2020 5:09 pm
by border
maxaret wrote: ↑Sun Nov 15, 2020 3:08 pm
3 pints would be perfect
Thanks Mate One day the Pubs will be open again
Got another couple of problems before MOT, Can solve them afterwards as dont think they are Failures
Re: MOT
Posted: Sun Nov 15, 2020 7:57 pm
by maxaret
Yep 3 pints in the pub would be perfect too