Bit of a rascal!

The place to socialise, and relax, if it doesn't fit into anything below it fits here, so tell us that joke, or share that story of your last off-road escapade, but remember new comers the virtual drinks are on you!
Post Reply
User avatar
stevepsj413
Engaged 4wd low
Engaged 4wd low
Posts: 193
Joined: Fri May 31, 2013 10:58 pm

Bit of a rascal!

Post by stevepsj413 » Thu Jun 23, 2016 8:34 pm

So, with my 2nd kja on the back burner until I can find a LWB chassis I've been looking for something else to fill the workshop. Saw this Bedford rascal on ebay and had a cheeky last minute bid on it....
And I won it. Been and paid for it and off to go get it when my mates free with his trailer.
Looks like the workshops full again then! I know its not quite a suzuki, but it is apart from the badges, it is a F10A after all.
If anybodys interested I can do a build thread on this wrongly badged suzuki when I get it.
Anyway, heres the pics from ebay.
Attachments
$_57.JPG
$_57.JPG (274.73 KiB) Viewed 8473 times
$_571.JPG
$_571.JPG (306.92 KiB) Viewed 8473 times
$_572.JPG
$_572.JPG (303.26 KiB) Viewed 8473 times
$_573.JPG
$_573.JPG (303.05 KiB) Viewed 8473 times
$_574.JPG
$_574.JPG (352.34 KiB) Viewed 8473 times
$_575.JPG
$_575.JPG (354.57 KiB) Viewed 8473 times
Top
SherwoodNash
Winching along now
Winching along now
Posts: 731
Joined: Sat Aug 09, 2014 11:05 am

Re: Bit of a rascal!

Post by SherwoodNash » Thu Jun 23, 2016 8:56 pm

Tidy dismantling, was the owners original plan to part it out then?
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Bit of a rascal!

Post by dan_2k_uk » Thu Jun 23, 2016 9:01 pm

I will happily watch a build thread of one of these. :thumbup:
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
Tramp
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2828
Joined: Fri Jul 25, 2008 10:09 pm
Location: Rotherham - South Yorkshire

Re: Bit of a rascal!

Post by Tramp » Thu Jun 23, 2016 9:12 pm

Awesome, I love it, looking forward to the build!
Top
User avatar
stevepsj413
Engaged 4wd low
Engaged 4wd low
Posts: 193
Joined: Fri May 31, 2013 10:58 pm

Re: Bit of a rascal!

Post by stevepsj413 » Thu Jun 23, 2016 10:09 pm

SherwoodNash wrote:Tidy dismantling, was the owners original plan to part it out then?
The previous owner was going to restore it, but he's moving house and theres no room for it where he's off. He had another one that he stripped for spares so theres lots of bits there twice. Should keep me busy, it came with a haynes manual so I guess thats like the instructions and its just like a big meccano kit!
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Bit of a rascal!

Post by ROBBIE » Fri Jun 24, 2016 7:41 am

Whats the plan?
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
User avatar
stevepsj413
Engaged 4wd low
Engaged 4wd low
Posts: 193
Joined: Fri May 31, 2013 10:58 pm

Re: Bit of a rascal!

Post by stevepsj413 » Fri Jun 24, 2016 3:18 pm

ROBBIE wrote:Whats the plan?
Weld up the holes, put it back together, paint it a nice colour, then MOT it and use it as my sunday driver.
Going to keep it standard for the moment and see what its like. Just want it back on the road really, theres far too few of these driving about.
Top
User avatar
zook123
SCUK Addict
SCUK Addict
Posts: 948
Joined: Sun Apr 20, 2008 10:48 pm
Location: Shepton Mallet

Re: Bit of a rascal!

Post by zook123 » Fri Jun 24, 2016 3:46 pm

I do quite like these, lowered on wide wheels haha.

But didn't a member on here, was it SRCARS? have one of these on a SJ chassis?
Image
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT

Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Bit of a rascal!

Post by ROBBIE » Fri Jun 24, 2016 7:43 pm

zook123 wrote:I do quite like these, lowered on wide wheels haha.

But didn't a member on here, was it SRCARS? have one of these on a SJ chassis?
Yep, another member has it now.....or did he sell it on????
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Bit of a rascal!

Post by Anton » Sat Jul 16, 2016 4:32 pm

Just curious as to how you got on...
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
Post Reply

Return to “The Bar”