1.6 vit engine conversion suggestions...

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
User avatar
ScottieJ
The Boss
The Boss
Posts: 11606
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: 1.6 vit engine conversion suggestions...

Post by ScottieJ » Tue Apr 05, 2016 11:55 pm

From my experience on Offroad days it's always the ones with 1.3 rads that have to stop more to cool down......fine on road but when crawling along at 10mph max for hours on end they don't cut it.

If the 1.3 rad was big enough then why did Suzuki fit a bigger one with the 1.6? ;)
Zuki Build

Steady as she goes!

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: 1.6 vit engine conversion suggestions...

Post by ROBBIE » Wed Apr 06, 2016 8:23 am

Never had any problems with my 1.3 rad either. With a Pug leccy fan it was always good, right up to the moment it split
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
MudMuncher
Got muddy boots
Got muddy boots
Posts: 15
Joined: Sun Sep 15, 2013 5:14 pm
Location: Wincanton, Somerset

Re: 1.6 vit engine conversion suggestions...

Post by MudMuncher » Wed Apr 06, 2016 12:20 pm

Let's not get the topic heated up, haha, 1.6 rad has been ordered up.

Currently 410 t-box is on there, and am wanting to upgrade to rocklobster, when funds allow.

Longer springs offer a better all round performance then? Will have to get looking for some hilux springs or something, like the sound of that. Would be cool to pop up sometime. My mob is 07********if you'd like to use that to arrange a time that suits you. Thanks. The SJ is laid up at the mo engineless as am taking the time to try and get the conversion done right. Measure twice and do it once and all that.

You may not have seen me though Dean because of my attempted camo paintjob I've done. Should be back pulling again by the end of the month. Gives me a chance to enjoy driving my puma again.

User avatar
ScottieJ
The Boss
The Boss
Posts: 11606
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: 1.6 vit engine conversion suggestions...

Post by ScottieJ » Wed Apr 06, 2016 12:37 pm

Cool, Yeah longer springs make a big difference to flex and ride comfort. you do need to make adapters to run them but that's not hard if you have basic fabrication skills.

cool I'll save your number and then remove it from your post so that you don't end up with floods of cold calls haha
Zuki Build

Steady as she goes!

User avatar
MudMuncher
Got muddy boots
Got muddy boots
Posts: 15
Joined: Sun Sep 15, 2013 5:14 pm
Location: Wincanton, Somerset

Re: 1.6 vit engine conversion suggestions...

Post by MudMuncher » Wed Apr 06, 2016 3:30 pm

Thanks most appreciated. Weren't a good idea that probably. My fabrication skills are ok, have kept her on the road for 6 years now, so I've had a bit of practice.

User avatar
ektoz
Engaged 4wd low
Engaged 4wd low
Posts: 153
Joined: Fri Apr 19, 2013 10:59 am
Location: Paphos, Cyprus
Contact:

Re: 1.6 vit engine conversion suggestions...

Post by ektoz » Tue May 10, 2016 12:07 pm

i have switched the engine of my sj410 to a 16v vitara i have fitted a sj413 gearbox with new stock clutch
am running 35s and i don't have any problems at all
Don't grow up, it's a trap
My build thread:
http://www.suzukiclubuk.co.uk/forum1/vi ... hp?t=10402

masaruneema
Got muddy boots
Got muddy boots
Posts: 3
Joined: Mon Jun 27, 2016 7:19 pm

Re: 1.6 vit engine conversion suggestions...

Post by masaruneema » Mon Jun 27, 2016 7:21 pm


Oscar
Got muddy boots
Got muddy boots
Posts: 18
Joined: Wed Mar 08, 2017 1:52 pm

Re: 1.6 vit engine conversion suggestions...

Post by Oscar » Mon Mar 20, 2017 2:04 pm

Hi,

I have seen this SJ is for sale, I cant seem to post reply on the for sale section so could you please get in contact with me,

Oscar

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: 1.6 vit engine conversion suggestions...

Post by ROBBIE » Mon Mar 20, 2017 4:56 pm

You should be able to once you reach 5 posts
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Post Reply