Page 1 of 2
Buying lift springs
Posted: Sun Oct 12, 2014 8:03 pm
by soalsix
Where's the best place to buy lift springs? I thought about spoa, but reading the pros and cons I'm not so sure about it. So lift springs seem the better way to go
Re: Buying lift springs
Posted: Sun Oct 12, 2014 8:44 pm
by Jordi
Llama 4x4 do decent springs.
Or you can go rears up front, YJs,
Re: Buying lift springs
Posted: Sun Oct 12, 2014 9:38 pm
by soalsix
Ruf, would I be looking at a couple inches lift doing that?
Re: Buying lift springs
Posted: Mon Oct 13, 2014 9:18 am
by twiss
If you go for new springs Dave @ Llama 4x4 is the guy to ask...
Ive got llama +2" front springs. They are a lot more comfy than the standard springs I had on, but were slightly too long so required a small shackle extension as well (equated to +0.5" lift)
Re: Buying lift springs
Posted: Mon Oct 13, 2014 1:53 pm
by ScottieJ
twiss wrote:If you go for new springs Dave @ Llama 4x4 is the guy to ask...
Ive got llama +2" front springs. They are a lot more comfy than the standard springs I had on, but were slightly too long so required a small shackle extension as well (equated to +0.5" lift)
Or correctly positioned bumpstops
Re: Buying lift springs
Posted: Mon Oct 13, 2014 1:54 pm
by twiss
lol you keep moaning about the bump stops but the axles weren't even close to where they should have been when the shackle hit the stops
Re: Buying lift springs
Posted: Mon Oct 13, 2014 2:04 pm
by ScottieJ
Well they are badly designed springs then as you shouldn't have to run longer shackles with lift springs.
Either way you can set up the bump stops to stop shackle inversion without loosing much up travel.
Re: Buying lift springs
Posted: Mon Oct 13, 2014 2:15 pm
by twiss
nothing wrong with slightly longer springs really.... give more flex if anything!
but yes they are too long for the vehicle really
Re: Buying lift springs
Posted: Mon Oct 13, 2014 2:21 pm
by ScottieJ
No I would rather run a longer spring.
However they are badly designed as a 'bolt on' lift spring if you cant run stock shackles without the risk of inversion.
Re: Buying lift springs
Posted: Mon Oct 13, 2014 2:31 pm
by twiss
Perfect for me as I had the shackles anyway.... shame you convinced me to take them off in the first place I won't listen in future (not that I do not)