Suzuki Club UK

the bore as in the size of hole where it bolts to manifold?

fatdaz wrote:the bore as in the size of hole where it bolts to manifold?

Yeah, the diameter of the hole on the manifold side of the carb.

he said it was around 38mm so left it :( but found another now

38mm would be a HIF38 suitable for a 410.

can i ask what sort of price people paid for their SU carbs, there are a couple on ebay, this one in particular but not sure what i should be expecting to pay for one.

http://www.ebay.co.uk/itm/Su-Carburetor ... 27d34d4380

£20 for one £90 for the other 2. Expect to pay £50 to £100 i would say.

Well got myself a hif 44 and needle and spring sorted and this is such a good thread I know where pipes will go,all I need now is a elbow to fit it to manifold ,I take it this will go on existing manifold . Silly question I exspect but anyway have a spare elbow ?

Crisdolf wrote:Well got myself a hif 44 and needle and spring sorted and this is such a good thread I know where pipes will go,all I need now is a elbow to fit it to manifold ,I take it this will go on existing manifold . Silly question I exspect but anyway have a spare elbow ?

Yeah just cut the two holes into one oval.

I had an adapter but once I actually learnt to weld it was too embarrassing even sat on the bench rusting so I binned it!

Oh cool well I don't weld lol but if u hear of anyone who's got one think of me

Right just q quick queistion my.mate has a 1.6 vitara engine in a 410 and it had a standard carb and it ran sweet as a nut but it has started to die on him so he has bought a Su carb and he has sent the manafold away and they have blanked the top off and made a hole in the side e.g bassicly a rockwatt manafold and he has bolted it on and some how it doesn't like low revs it starts fine and.revs fine but as soon as u let go of the throttle it dies any suggestions or pics please